thanks man
yea I sure hope so, thanks!

Finished up the trans crossmember...
http://i83.photobucket.com/albums/j3...o/HPIM1602.jpg
Smoothed out the welds real nice
http://i83.photobucket.com/albums/j3...o/HPIM1606.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1608.jpg

http://i83.photobucket.com/albums/j3...o/HPIM1609.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1610.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1611.jpg
Mocked it up
http://i83.photobucket.com/albums/j3...o/HPIM1613.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1617.jpg

http://i83.photobucket.com/albums/j3...o/HPIM1619.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1623.jpg
Now this plate will be welded to the frame and the nuts will be on the inside, a hole will be drilled to clearance the nuts and the plate will sit flush on the frame and welded all around.
http://i83.photobucket.com/albums/j3...o/HPIM1625.jpg
Then the other plate will be welded to the crossmember and allow it to be bolted in
http://i83.photobucket.com/albums/j3...o/HPIM1626.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1627.jpg

WOW this is a awesome build

thanks homie!

well finished the trans crossmember...

Drilled some holes to recess the nuts
http://i83.photobucket.com/albums/j3...o/HPIM1633.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1635.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1636.jpg
Cut the crossmember and tac'd it in place
http://i83.photobucket.com/albums/j3...o/HPIM1638.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1641.jpg

All set
http://i83.photobucket.com/albums/j3...o/HPIM1643.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1644.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1645.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1647.jpg
Then played with some ideas for the next crossmember, and since I wanted to have one at the sweep up, and one 6" back from the ujoints I needed to come up with a good looking way to do so, instead of three round bars in a row, so I added another X
http://i83.photobucket.com/albums/j3...o/HPIM1648.jpg

Cut some tubing, and notched the small pieces
http://i83.photobucket.com/albums/j3...o/HPIM1650.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1652.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1653.jpg
http://i83.photobucket.com/albums/j3...o/HPIM1654.jpg
All done by eye and a hole saw on a drillpress
http://i83.photobucket.com/albums/j3...o/HPIM1658.jpg

GREAT JOB GMRACER!!!
Glad to see you got some spare time to work on it.:thumbsup:

Good JOB I love the lift :yes: :yes: :yes: