Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project "G-Velle", Pro-touring with patina (https://www.lateral-g.net/forums/showthread.php?t=41839)

65_LS1_T56 07-05-2013 07:17 AM

Quote:

Originally Posted by WSSix (Post 491430)
Gauges look nice! Congrats on getting the car running. It's a wonderful feeling.

It is, emotional actually. Lot of late nights, highs and lows, come down to this.

Quote:

Originally Posted by Rick D (Post 491439)
Nice Aaron, that's a great shot with your son in it!! :thumbsup: to me that's what makes it worth it in the end!

That's my youngest Ryan, 6, with the arm out, my oldest Luke,10, is in the driver's seat. Here's one of them both. They both told me how proud they were of me...makes a dad melt. :)
http://i1207.photobucket.com/albums/...ps5f4c9b98.jpg

Quote:

Originally Posted by TandL (Post 491444)
"doughnuts in the grass" :drive::beavis::thumbsup:

lol, yah...I woulda hit the road but no bumpers woulda been a little obvious...county sheriff lives just around the corner :innocent:

214Chevy 07-05-2013 07:43 AM

Quote:

Originally Posted by 65_LS1_T56 (Post 491377)

Aaron, I bet he's saying.... "Yeah, this is mine as soon as I hit 18 or 20." :bigun2:

65_LS1_T56 07-05-2013 08:00 AM

Quote:

Originally Posted by 214Chevelle (Post 491462)
Aaron, I bet he's saying.... "Yeah, this is mine as soon as I hit 18 or 20." :bigun2:

:lol: Probably true Marcus. his older brother has a 70 El Camino coming from his grandpa:unibrow: . So Ryan may be eying the 65. Unless his grandpa parts with the 57 Bel Air HT...
Expect a full build thread for the elky, someday.

G-Body 07-06-2013 09:47 PM

WOWWWW bad ass build congrats love the whole design and theme! best of luck!

65_LS1_T56 07-07-2013 12:23 PM

Quote:

Originally Posted by G-Body (Post 491762)
WOWWWW bad ass build congrats love the whole design and theme! best of luck!

Hey :thankyou:

65_LS1_T56 07-08-2013 08:05 PM

Finally got the cold air intake wrapped up tonight, geesh...ended up getting a kit from Spectre. Took almost 3 months to get, ended up getting the wrong one. The one I got was for a 2nd gen Camaro

Anyhoo, bygones...ended up making a divider panel from 1/16" aluminum. Turned out pretty nice I think.
http://i1207.photobucket.com/albums/...ps5f20b214.jpg
http://i1207.photobucket.com/albums/...psa1d3a937.jpg
http://i1207.photobucket.com/albums/...ps4e18145e.jpg

1965_SS 07-09-2013 08:12 AM

VERY nice setup!

Geez, I think you should just make two of everything and send the second set to me out here in CA:poke::thumbsup: My 65' would love it:D

65_LS1_T56 07-09-2013 09:29 AM

Quote:

Originally Posted by TandL (Post 492117)
VERY nice setup!

Geez, I think you should just make two of everything and send the second set to me out here in CA:poke::thumbsup: My 65' would love it:D

lol, sure parts are on the way :rolleyes:

If I knew I could make a decent living at it, I'd be machining custom stuff like a mad man. Several guys have asked for stuff, and it's flattering, but it takes a lot of time. Totally enjoy it though.
Probably one of the coolest things we've made at work, billet front lower control arms. Machined from 2" thick aluminum plates.
http://i1207.photobucket.com/albums/...psd58bce81.jpg

1965_SS 07-09-2013 10:37 AM

Quote:

Originally Posted by 65_LS1_T56 (Post 492143)
lol, sure parts are on the way :rolleyes:

If I knew I could make a decent living at it, I'd be machining custom stuff like a mad man. Several guys have asked for stuff, and it's flattering, but it takes a lot of time. Totally enjoy it though.
Probably one of the coolest things we've made at work, billet front lower control arms. Machined from 2" thick aluminum plates.
http://i1207.photobucket.com/albums/...psd58bce81.jpg


WOW.....what are those for?

tommycomfort 07-09-2013 10:39 AM

Quote:

Originally Posted by 65_LS1_T56 (Post 492143)
lol, sure parts are on the way :rolleyes:

If I knew I could make a decent living at it, I'd be machining custom stuff like a mad man. Several guys have asked for stuff, and it's flattering, but it takes a lot of time. Totally enjoy it though.
Probably one of the coolest things we've made at work, billet front lower control arms. Machined from 2" thick aluminum plates.
http://i1207.photobucket.com/albums/...psd58bce81.jpg

Cool, can you make some for a Chevelle? That's what really matters...


All times are GMT -7. The time now is 12:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net