Welcome Bruce. Let Scott know, it's much appreciated.

Jody

Bruce, how you doing? Hope to see you at the Party. True highlight for me during SEMA week. Look forward to seeing you. Say hello to the fam.

Hey everyone, Bruce is an awesome guy and takes some mean pictures.

Thanks guys! Looking forward to seeing everyone I already know and meeting some new people, too! :yes:

BTW, how do I get in touch with Scott? :_paranoid :D

Bruce, shoot me an e-mail. :thumbsup:

Scott...Done!

Sema party
 

Scott,
I need to add 4 more if there is room, also everybody from the shop is going SEMA this year. We have a car going to a vender booth.

Kevin
Campbell Auto Restoration {CAR}

Hi guys...a couple of updates:

The open house this Nov 1st will be at the same warehouse location as last year, so I hope Scott/Jody can post the maps/directions we posted last year that still apply for this year's event.

Our black '06 Z06 Corvette with Garrett TT system will be displayed along with Dyno RWHP/TQ printouts and video of the car doing the 1320. We're also hoping and planning to display the yellow '06 Z06 with ProCharger supercharge system with Dyno reports/video. Both cars are sporting HRE Performance wheels and 335's under the rear. We stuck a cam in my yellow '03 Z06 last week and HRE wheels with 345's at the rear [no mini-tub required]. We baselined it at 346 RWHP, then after the cam and exhaust...it turned the roller at 471 RWHP. We've baslined over a dozen factory configured '06 Z06's that have averaged 467 RWHP, so a simple cam job will make the C5 Z06's run with the new 427 versions.

I don't have as many cars available to display as last year [we had 33 cars last year], so I'd like to invite members here to bring their car to display. We'll have room for up to 10 more cars, so drop me a PM if you're able to bring your car.

Look forward to seeing you guys in 5 weeks.
SS

I updated the original post in this thread to include a mapquest link to Sandlin Lumber.

Again, thanks for the hospitality Steve, it's appreciated by all of us. :thumbsup: :thumbsup:

Steve, looking forward to seeing you again. I do have a few questions for you. Your '03 only has a cam and exhaust and you picked up 125rwh with those two items only? Are the heads ported/shaved? Does it have a Fast intake, larger TB or anything else? Btw, I just dynoed my '06 Z that has headers, hi flo cats and a small cam and it put down 532 rwh. I bought a set of LS7 heads and they are getting ported now..

Looking forward to seeing your '06 Z's also. :thumbsup:

SW

http://www.fototime.com/419A43363FFDD63/orig.jpg

oops...forgot to mention it got FAST intake and custom AIR-box. Gil didn't mention anything about headwork.


http://www.camcojb.com/010001.JPG

http://www.camcojb.com/S4010053.JPG