Very cool Truck!!! Nicely done!

Yeah.... that looks like a lot of fun. Always wanted one.

:captain:

Hows your car doing? :peepwall:

Ummm, oh, that car…😳. I have been making progress ever so slowly. The last major update I posted was right before Covid. Since then, we stripped it back down to the shell and sent it off to the body shop to finish the major metal work, shave drip rails, and fit up the fesler flush mount glass (that was fun).

I received the shell back in August or so of 2020 and it sat in my car trailer while the C10 was being finished up. Since then, I have been cranking away. It’s wired, plumbed, and mostly mocked up. I was hoping to get it back to my body guy to get that finished up but he’s way behind schedule and it’s not looking like he can take the car back until this fall sometime. So, now my plan is to keep moving forward, and get to a point where I can start the car, check all electrical systems, and make sure everything is working before it goes back to the body shop. Probably a better plan anyway…. Here are a handful of progress pics.

I want to know what inner wheel wells did you use???

Looking at the wiring harness's do you have a harness coming out of each side of the firewall??? noticing the hole on the drivers side,

Hey Steve - the inner fender wells are Speedtech fiberglass. On the wiring, I have the body harness in the stock location and the engine harness is coming through the hole I installed on the driver’s side. The PCM is located under the dash and the engine fuse box is located on the drivers side core support. I had to completely rework the harness to make this work but I really wanted the PCM under the dash inside the car. Here’s a few more pics of the wiring and where I installed the PCM.

Love the details.

Very cool build..

Very Cool, I'm laying things out, My plans also, PCM inside and the harness thru the firewall,

How thick is the foam you have in the interior??

I'll look at the Speedtech site, always gathering ideas to implement on my car,