Lateral-g Forums - Hobbs Camaro (Old Drag Car)

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Hobbs Camaro (Old Drag Car) (https://www.lateral-g.net/forums/showthread.php?t=59856)

https://uploads.tapatalk-cdn.com/202...bd447510f9.jpg
https://uploads.tapatalk-cdn.com/202...b177e26c11.jpg
https://uploads.tapatalk-cdn.com/202...da403240f4.jpg
Matt had some rework to the the DSE upper link pockets to be square.

Sent from my iPhone using Tapatalk

There were some questions on the air cleaner and the throttle body. This is another Camaro at Sled Alley.

https://uploads.tapatalk-cdn.com/202...cf351bca37.jpg
https://uploads.tapatalk-cdn.com/202...313c2760ee.jpg
https://uploads.tapatalk-cdn.com/202...33e5d98af1.jpg

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by bulldog19 (Post 723056)

There’s no substitute for cubic inches!

Quote:

Originally Posted by Stielow (Post 723066)

Boost?

They go together like peanut butter & jelly.

Hobbs Camaro (Old Drag Car)

Some more updates from Sled Alley

https://uploads.tapatalk-cdn.com/202...92d5167bbb.jpg
https://uploads.tapatalk-cdn.com/202...a502717d04.jpg
https://uploads.tapatalk-cdn.com/202...ff07c5f0c6.jpg
https://uploads.tapatalk-cdn.com/202...f02adf505d.jpg
https://uploads.tapatalk-cdn.com/202...87a776cf57.jpg

I decided to try the stock 12 bolt for this build. It had a crack in one of the tubs from all the drag racing. Matt fixed that and got it tuned up.

We have been have a lot issues with noisy Ford 9 inch rear axles. We put a Ford 8.8 in another build and it is quite. I hope the 12 bolt works better also. Time will tell.

Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/202...3f023125a7.jpg
https://uploads.tapatalk-cdn.com/202...c585b51424.jpg
Addhttps://uploads.tapatalk-cdn.com/202...307a2c2371.jpg
https://uploads.tapatalk-cdn.com/202...fb468a0848.jpg
Added the DSE brackets and my axle ends for C6 hubs so I can add ABS. We weld on washers now to enable a clean wiring installation later.

Sent from my iPhone using Tapatalk

Amazing quality of work .. loving it

https://uploads.tapatalk-cdn.com/202...65752692ff.jpg
https://uploads.tapatalk-cdn.com/202...526bd9ae50.jpgahttps://uploads.tapatalk-cdn.com/202...cb1f3db2f1.jpg
These are made out of 304 stainless steel. They make excellent tie down points and they won’t rust. We leave them unpainted. A Sled Alley original product!

Make strapping a car down very quick, safe and easy.

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by Stielow (Post 723356)

I will definitely give Matt a call when I get to that point, been looking for something clean and secure to tie the car down when trailering. Or to pull it up our steep driveway if it quits at the bottom. :lol: