Looking great!! Progress is always a good thing!! Something I wouldn't know anything about!!:lol:

I've got about 80 hours into this lip now and I'm still not finished filling in some low spots or priming it.


Sorry about some of the blurry pics(camera battery was dieing that day)


I took some 18 gauge 304 stainless and made four pieces, two for the front and one for each side. I left some gaps on the side pieces so I could round the edges to match the bumper. I'll lay the fiberglass on real thick so it can with stand a lot of abuse.


I rolled the edge to give me a surface to attach to the lower portion of the bumper.
http://i41.photobucket.com/albums/e2...r/100_1352.jpg

http://i41.photobucket.com/albums/e2...r/100_1353.jpg

Getting everything centered before throwing some rivets to hold it in place.
http://i41.photobucket.com/albums/e2...r/100_1354.jpg

I ended up using bolts because the rivets I had were to long.
http://i41.photobucket.com/albums/e2...r/100_1355.jpg

http://i41.photobucket.com/albums/e2...r/100_1356.jpg

http://i41.photobucket.com/albums/e2...r/100_1357.jpg

http://i41.photobucket.com/albums/e2...r/100_1358.jpg

http://i41.photobucket.com/albums/e2...r/100_1359.jpg

Basic overview before the fiberglass begins
http://i41.photobucket.com/albums/e2...r/100_1364.jpg

http://i41.photobucket.com/albums/e2...r/100_1366.jpg

http://i41.photobucket.com/albums/e2...r/100_1367.jpg

*adding some bracing
http://i41.photobucket.com/albums/e2...r/100_1394.jpg

http://i41.photobucket.com/albums/e2...r/100_1395.jpg

http://i41.photobucket.com/albums/e2...r/100_1396.jpg

http://i41.photobucket.com/albums/e2...r/100_1397.jpg

& the messy part begins.
http://i41.photobucket.com/albums/e2...r/100_1399.jpg

http://i41.photobucket.com/albums/e2...r/100_1401.jpg

http://i41.photobucket.com/albums/e2...r/100_1402.jpg

My brother drawing in the air inlet design
http://i41.photobucket.com/albums/e2...r/100_1398.jpg

http://i41.photobucket.com/albums/e2...r/100_1405.jpg

http://i41.photobucket.com/albums/e2...r/100_1400.jpg

*taped off the area he drew and spray painted the inside
http://i41.photobucket.com/albums/e2...r/100_1409.jpg

http://i41.photobucket.com/albums/e2...r/100_1411.jpg

*almost done opening up the holes
http://i41.photobucket.com/albums/e2...r/100_1413.jpg

I went a little crazy with the fiberglass but I wanted this thing VERY strong.

http://i41.photobucket.com/albums/e2...r/100_1430.jpg

http://i41.photobucket.com/albums/e2...r/100_1429.jpg

http://i41.photobucket.com/albums/e2...r/100_1415.jpg


Here is how it looks today.
http://i41.photobucket.com/albums/e2...r/100_1475.jpg

http://i41.photobucket.com/albums/e2...r/100_1480.jpg

http://i41.photobucket.com/albums/e2...r/100_1478.jpg

Curiousity has been getting the better of me lately so I borrowed the big boss mans scales.

http://i41.photobucket.com/albums/e2...r/100_3746.jpg

STOP IT!!!! LOL!

John