How do you like your Bendpak lift?

Here's a couple of our new digs....................

http://sphotos.ak.fbcdn.net/hphotos-..._3063791_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-...2_755266_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3077641_n.jpg

Here are a couple of pics of my shop. Its 40x50x14. Still a work in progress as I suspect that will always be the case. I still need to run my air lines, but thats going to be easy now as I just received my lines and fittings from Applied System Technologies (Infinity Air). Nice alumimum blue lines with brass fittings that are plated. Snap together style.

http://i416.photobucket.com/albums/p...s/DSC00864.jpg

http://i416.photobucket.com/albums/p...s/DSC00865.jpg

Jay! :thumbsup: :thumbsup:

Thanks Greg! The 69 BBC Chevelle belongs to a friend of mine. Its a very nice car.

Dang Jay your garage makes mine look like crap here!!!!

I got inspired over the summer and got the inside of mine done.
http://i15.photobucket.com/albums/a3...uild/8shop.jpg
http://i15.photobucket.com/albums/a3...uild/2shop.jpg
http://i15.photobucket.com/albums/a3...uild/5shop.jpg
http://i15.photobucket.com/albums/a3...uild/6shop.jpg
http://i15.photobucket.com/albums/a3...uild/7shop.jpg
http://i15.photobucket.com/albums/a3.../011Garage.jpg

Here is my garage. A bit small but gets the job done. The office and bath takes up a fair amount of room. Gas Furnace and also A/C

The garage shell was here when I moved so make do with what I have.

http://img.photobucket.com/albums/v5...e/0040a640.jpg
http://img.photobucket.com/albums/v5...e/d6d5851b.jpg
http://img.photobucket.com/albums/v5...e/cc13a534.jpg
http://img.photobucket.com/albums/v5...e/8ab27cf9.jpg
http://img.photobucket.com/albums/v5...e/a8f86963.jpg

nice garge there timewarped. How many square feet? I think it is a pretty good lay out you got . just make office smaller and use part to hold equipment or engine building room. Brandon

Looks good to me! What size is it?

Beautiful Shop Timewarp. I wish I had a garage that was that small.. I have to make due with a 22x22.

Thanks All! the shop is 1600 sq ft, a bit small when I have a couple projects torn apart but does the trick. I also have a 1000 sq ft garage on the house to keep other toys etc. And two storage sheds for the overflow from that.
HUGE storage area above garage but its too high to put anything up there... The office and bath does take up a fair amt of room but for how many trips per day I have to go bathroom... It gets used more than most tools! LOL

I keep the temp T-Shirt "weather" in the garage and humidity around 50% year round.

Its seems the more tools and equipment I buy, the the smaller the garage gets! LOL

Now the tools and equipment take up the better part of 800 sq ft. Add in the extra parts and a 1000 sq ft garage is too small WITHOUT a car parked in it.

I always tell the wife. "I need a 239 car garage and a studio apartment, BECAUSE I could always add on to the GARAGE"

Damn garage is bigger then my house in square feet!!!! Man that would be my dream loose 1/2 office.

Snapped some pics of our garages tonight. We built our detached a couple years ago and never painted the interior. It's getting painted this weekend so we moved everything over to the attached. Then we're moving eveything back and having the attached taped/textured and painted next week.


1000 Sqft Detached 3 Stall garage/"shop"
http://i923.photobucket.com/albums/a...e/IMG_5316.jpg
http://i923.photobucket.com/albums/a...e/IMG_5319.jpg
http://i923.photobucket.com/albums/a...e/IMG_5318.jpg



Attached two stall with some "stuff" in it! :D
http://i923.photobucket.com/albums/a...e/IMG_5321.jpg
http://i923.photobucket.com/albums/a...e/IMG_5327.jpg
http://i923.photobucket.com/albums/a...e/IMG_5333.jpg

Nice!

Very nice Ed.

Thanks guys! :cheers:

Nice looking garage Ed. Nice engine bay as well in that Camaro!:thumbsup:

spent the whole summer remodeling my house and garage and finally almost done ! here is a link to the build.hope to get back on cars this winter!
http://www.garagejournal.com/forum/s...ad.php?t=48204
http://i643.photobucket.com/albums/u...ior/0592-1.jpg
http://i643.photobucket.com/albums/u...ust2010190.jpg
so sick of working 16 to 18 hr days just want to relax a bit.:woot:

My 2 car garage.. Most of my work is done outside in front of it

I'll give you A+ for clever storage!!


I used to do all kinds of work out front of my old house (before moving here and building my the shed)... and my neighbors hated it.... until they broke the hinge off their garbage can lid and needed it welded... and the other neighbor needed his lawnmower blade sharpened... etc. THEN I became the go to guy! :yes: :cheers:

Thank you! Yeah, I know my neighbors aren't happy with the "howling" I make, too (air tools) I haven't lived here long enough yet to become their "go to" guy. One day, I'm sure...

Here is a picture of our front showroom...... we do assembly/clean work up here and the dirty work in the back. This is an older picture....
http://i1204.photobucket.com/albums/...g?t=1288560998

A view with some of our chassis's and project RS-V camaro in the beginning stages
http://i1204.photobucket.com/albums/...s/hpishop2.jpg
And our parts counter/storage area (2 levels of shelving!)
http://i1204.photobucket.com/albums/...s/hpishop3.jpg
And a few shots of one build bay where we use the frame table we designed, please excuse the crappy compressor, this was when we just started, before we could afford the ingersol we have now!
http://i1204.photobucket.com/albums/...tures/hpi2.jpg
The frame on it is for our "protouring/street rod" 1940 Plymouth, look for it in projects page soon!
http://i1204.photobucket.com/albums/...rametable1.jpg
And one more.... our new toy in action!
http://i1204.photobucket.com/albums/...g/milling1.jpg

Very nice Tyler. Looking good.:thumbsup:

Here is mine garage, about 1080 sqft, water heated floor, double sheetrock walls and ceiling:

Build it my self, plus coupple buddys from work. Only electric connections by hired help.

http://kuvablogi.com/nayta/prev/img1068773.jpg

http://kuvablogi.com/nayta/prev/img2398760.jpg

http://kuvablogi.com/nayta/prev/img2398761.jpg

http://kuvablogi.com/nayta/prev/img2869931.jpg

havent got recent pics, been to busy working : )

Tyler beautiful shop and a nice new toy too.

SuperB70 nice job on your shop. You guys did a great job

Ok so here is a few pics of my garage. Its 785 sq feet with skylights and a overhead trolley with electric hoist. Only thing sucks is no storage in the attic with this idea. So Sinco ( member) and I made some cabinets with 200lb per draw capacity and buckets fit in the bottom draw.Thanks Doug.
And of course it has a bathroom and beer fridge.:D

Nice looking shop fulltilt :thumbsup: and a looks like a bada$$ jeep.

Nice work.

Is that Storage above the water heater

thanks guys and yeah the area above the hot water heater was my first thought of storage and to hide the air conditioning duct work.

My Garage
 

I haven't posted much, although I am on the site often following different threads. My car has been on the back burner for a long time and now I am working steady on it so I have been spending quality time in my shop. My garage is 32'x55' with a storage area in the back for work and a 2nd floor that is drywalled but unfinished. Garage has central heat and air and a full bath that is not finsihed. I figured on all the essentials in case my wife locks me out for spending too much time out there. I haven't heard it yet, but the camaro has only been back home for 2 months now after being gone for a couple of yrs. I know it is coming sooner or later.

1969 Crossram where in Delaware are you?
Nice garage and projects!

Delaware
 

I live in the Newark area not too far from the U of D. Do you live in De? Dave

Yes I live in Millsboro, 1/2 hr west of Rehoboth Beach and 12-min from the site of the Latest Extreme Home Makeover that is underway this week.
It's endured an earthquake and now possibly a hurricane. Is someone trying to say something?

Down State
 

My car spent the last year down close to you. My friend (Zeglins Automotive)relocated there a few years ago and I had him do all the metal work on the car. He is a great mechanic if you are ever in need. He is off of Townsend Rd. He does great body and paint work also. My Mom has a summer home in Massey's Landing. I had the car media blasted down there too. I can't remember the name of the guy that did the media blasting but I remember he had a very nice collection of antique items in his shop.

Thanks for the tip. My car is done just a few little odds and ends and gremlins that need to be cleaned up.

Here's a few photos of the shop.

http://i55.photobucket.com/albums/g1...s/DSC_0038.jpg

http://i55.photobucket.com/albums/g1.../DSC_01402.jpg

http://i55.photobucket.com/albums/g1.../DSC_01382.jpg

http://i55.photobucket.com/albums/g1...s/DSC00004.jpg

http://i55.photobucket.com/albums/g1...s/DSC00019.jpg

The newest addition is this south wall and awning we built. I still want to build a large lighted sign (old Vegas style) and hang on the wall, just waiting on the time!

http://i55.photobucket.com/albums/g1...s/IMG_2382.jpg