DG your motor is all done and on the dyno right?

http://i291.photobucket.com/albums/l...ps806017a0.jpg

:hairpullout: :popcorn2:

Almost there... should be ready by the 5th Tuesday this month.

Good to hear. I've got that date marked on my calender along with Tuesday Weld's birthday (no relation obviously :peepwall: )
which is on the 4th Tuesday of August this year. #dynodaysarcasm


http://i87.photobucket.com/albums/k1...psa5918d0c.jpg

C-Rob ... you ready to sub in for me?

Looks like I will be a month before I bring the noise over here. :getout:

I guess it ain't bad for you Rob. Your numbers beat zero until I actually get some numbers eh?

:bitchslap:

soon....

Define "soon" :popcorn2:

Define your profile pic

I'll find out more tmrw. :underchair:

I'll plead guilty there. It was a chat Rob and I had where we were comparing wheelbase and track width.

:mock:

:poke:

:D

I just liked the picture. :snapout: It isn't all about you DG :mock:

:idea: You could fit that SBD car in the Torino trunk and use it as a support vehicle. :D

It may not be yet... but once my motor is done in 2014 it will be.

:rules:

OK now I understand "soon" it means less than eight months :action-smiley-027:

By "support" do you mean have a ride home when the Torino isn't cooperative?

Support vehicle must be a Chevy. Naturally.

:action-smiley-027:

:snapout: Like your daily driver :D

That's a Toyota with 343k miles. :animated_bye_bye_em

The clown car is a Ford. :D

Like you said

:snapout: I would NEVER imply such a thing.............:lmao:

:idea: Bring this maybe it will help explain your goal. :underchair:

http://i291.photobucket.com/albums/l...psb2794671.jpg

What is that, A beer cozy with wheels??

I sense invites going out for DG's 'engine' shower soon...

I lied. Heads have been sent back east to Nascar country for some non-Nascar port work.... when in Rome.... what? :lostmarbles: :sieg:

And like I told Rob, it's not like there's a car waiting for this motor get put in and go. Just a dyno contest thread that I am good at stretching out....

http://forums.themustangsource.com/i...ilies/blah.gif



lol

DG has a new goal. Spend $51k building a Chevy :rolleyes:

Shiat... I better get a full suspension, wheels, an engine, and much more for that number..... :underchair:

Or I could get an IRS and an FE.... pretty easy choice there. :action-smiley-027:

Did you send that from your iphone? :D

Clever :lolhit:

Naw, all you need is a billet pan :D

No matter what get a contract before you hand over the $$:poke:

I am on my 3rd and final oil pan for this dang engine. :sieg:

Too late. I better go over there tmrw and see if the shop is still there. :G-Dub:

I should have just used a set of Blairs pro port Edelbrocks. :headscratch:

http://fepower.net/simplemachinesfor...;last_msg=9237

Photo quality of the dyno sheet is poor because it was taken with Blair's cell phone camera. I have never seen an 800 lb-ft FE except for my big SOHC, and that engine was 585 cubic inches. This engine is only 506 cubic inches. That is a very, very impressive torque number. And the horsepower peak of 911 HP from 6400 to 6600 RPM is also really impressive.

I spoke with Blair on the phone tonight for a while about this engine. Apparently it is basically one of his Super Stock FEs, but with more cubic inches, less compression, and a smaller cam. His normal 427-based super stock engines turn to 9000 RPM to make this kind of horsepower. Compression ratio on this engine is 13:1, and the cam is a 270@ .050" duration cam with about .700" lift. The idea behind the engine is that the reciprocating assembly and cam can be changed and the engine will turn into a legal super stocker. The heads are Blair's pro-port Edelbrock heads, and the intake is a tunnel ram style intake with two 715cfm Holleys. Blair pointed out that the heads and intake were ported and tuned together on his flow bench, to really optimize the combination.

That's about all I know at the moment, but I'm sure we'll hear more in the coming days...

I guess he meant Nov 2013:stirthepot:

Sounds like the whole contest is going up in smoke...

http://northernutahrealestatenews.fi.../bbq-fire1.jpg


:innocent:

:D

That looks like the BBQ spot Brian took us to in TX.:rofl:

:lol:


Really?

Semi-:innocent:

I don't see anything ?? That's what it looks like every time I cook on the grill.:headspin: