I really enjoy reading all the troubleshooting and problem solving!!
I know it takes a lot of time and effort to bring all that to the forum but that is definitely appreciated!

Jeff-

Couldn’t agree more. Thanks for taking the time to educate folks.

Thanks for the compliments!

You're welcome. I started posting on all the troubles I was finding because I thought I couldn't be the only one hitting so many snags in my build! All these little things can definitely get frustrating and have tripled the time of some part installs but it's always worth it in the end! Hopefully I've helped a few out along the way.

Nice find on the harness mistake, I know that wasn't easy to track down. Was that Holley's harness?

Good luck with dialing in the tune. You are going to love the data you get with Holey EFI and how easy it is to make corrections with it. Be sure to keep saving "good tunes" just in case you get out of whack for some reason. Always good to have a good tune to fall back on...trust me.

Are you going to UMI this weekend? I am flying up in August for KOTM so I can't wait to see your car and meet you in person.

No, the harness was custom made by someone on the third gen Camaro forum to specifically fit my car... honest mistake but still cost me a week or so of troubleshooting!

I am planning on being at UMI this weekend. I don't think I will be at KOTM unless I win my way in this weekend by taking a shortcut on the autocross and no one notices! Ha!

I have an invite to KOTM, but no car to drive... :whistling:

Been a LONG time since an update and not quite sure where to pick up! Since July, I've been doing all I can to drive this car on both the street and the track.

My last post left off with my getting ready to leave for the UMI autocross challenge and the car did awesome with no issues. I was really happy with being able to just hop in the car and rip off some autocross laps. Here are a few action pics:
https://live.staticflickr.com/65535/...270ee5f4_z.jpg
https://live.staticflickr.com/65535/...61bd73f5_z.jpg
https://live.staticflickr.com/65535/...f2fb6ece_z.jpg

After that event, I was able to attend another local autocross with the Ford SVT club. This event was a little over an hour away and was my first time driving the car to an event as opposed to towing it. Luckily everything went great and the car cruises awesome on the highway:
https://live.staticflickr.com/65535/...36c754ea_z.jpg
https://live.staticflickr.com/65535/...9bd40f3c_z.jpg

Unfortunately, I got flagged at the autocross for breaking the sound limit at the start line. Woops, I guess 2 small chambered pipes aren't quite enough. The car was a bit loud for me anyway so I had a local muffler shop add a Magnaflow bullet muffler where the stock cat used to be which quieted to car down a bit:
https://live.staticflickr.com/65535/...5bf92a6b_z.jpg

In the fall I was able to get the car out to its first track day at an SCCA Track Night in America event at one of my local tracks (Thomposon Speedway Motorsports Park). This time the drive was a bit further (just under 2 hours) and again I drove the car solo with just my tool kit and a jack in the back. I prefer track driving to autocross and had an absolute blast letting the car stretch its legs a bit. I took it slow and built up speed gradually since this was my first time on a roadcourse with the car. I even hit some traffic and rain on the way home and the car didn't miss a beat... something I really attest to the Holley Terminator X EFI. I'm REALLY learning to trust the car now since I actually trust what the gauges are telling me and can program just about anything.
https://live.staticflickr.com/65535/...8f7223ce_z.jpg
https://live.staticflickr.com/65535/...b6b0ec33_z.jpg
https://live.staticflickr.com/65535/...6651856e_z.jpg
https://live.staticflickr.com/65535/...84b0442e_z.jpg

The car is currently in the garage for some winter work. I'm trying really hard to not take on any major projects this winter that end up creeping into the summer. I've really enjoyed having the car running well over the summer and fall and hope to continue that next year. I'm sure I'll find some trouble to get into but hey that's half the fun.

I'll try my best to be better with some updates moving forward, but you can always find me on Facebook (Garage Engineering) or Instagram (garage_engineer) for some daily updates!

https://live.staticflickr.com/65535/...13ca36f2_z.jpg

Car looks great! :thumbsup:

I'm following on IG but the story & info posted here is better for content since it's easier to review and/or view.

Love this car, awesome build

Extremely well done! Like the Chevy square bodies, the 3rd gen Camaro is really growing on me.

Excellent!! Love seeing a project finished and being enjoyed.

:captain:

This is definitely where the most detailed information on the car lives! Appreciate the follow on IG.

Thanks guys!

I don't think they're every really done... they just go in stages and I'm trying to enjoy this driving stage as much as possible.

That's fantastic to hear the car has performed well for you. Congrats! I hope 2022 is even better for you.

Great looking 3rd gen!

Great results to go and enjoy it...keep us updated. My son just brought home a Gen III project car so i'll start paying more attention to the updates.