I just put tires on them. I'll get some photos Sat.

Mark

Some updates:

C&R radiator/ICHE and Vintage Air condenser mounting

http://i1158.photobucket.com/albums/...2/DSC_3872.jpg

Bosch ABS controller and coolant fan mounted. Chassis wiring in progress...

http://i1158.photobucket.com/albums/...2/DSC_3877.jpg

E67 controller and fuse block located as was on Hellfire....

http://i1158.photobucket.com/albums/...2/DSC_3881.jpg

JA is looking good.:king:

Gordon and Mark. Does C&R have drawings for that ginormous cooling stack ? Could any of us peons order one if we were prepared to do the radiator support mods ? Also, is the fan available, or top secret for Stielow Inc. ?

I think in a previous thread Mark mentioned he used the Cadillac SRX fan and its PWM.

Yes on Camaro XV for sure. But above he mentions he is using a new Spal 850W fan this time around. I live in Phoenix and cooling is just about as high on the priority list as it can get !

Just got off the phone with Paul at C&R - he handles all of these types of projects - highly recommend you give him a call, I have no doubt he'll hook you up for exactly what you were looking for.

He's at the south office.

Here is the "Stielow inspired" radiator with three integrated coolers that C&R designed and built for me that doesn't require any core support mods. They said it was quite a packaging challenge. I only have a stock LSA so hopefully it will be adequate versus Hellfire's 2X horsepower. The left side connection will be a bit of a challenge with the air intake but I think I can make it work.

I hope Mark doesn't mine me posting my junk in his thread. :>)

Don

Looks good.

The C&R guys are very good to work with. We went back and forth on a few designs with great drawings. The actual parts are spot on to the drawings and fit great.

Mark

That's what is so nice about lat-g, ask one question and get three answers - Thx!