any updates?

probably not til after SEMA

thanks ill be waitn:yes:

Good Morning All,

I know it's shocking - I am actually doing an update before Sema.

Well, it looks like more parts are flying in.
We contacted the guy's at Jesel and they were kind enough to help us with the part numbers
of everything we needed to get the Pontiac Heads put together.

Once we had all of the part Numbers I called Scoggin Dickey Parts Center
www.sdpc2000.com -- these guy's are top notch and there prices are dirt cheap.

http://www.syborgtwinturbo.com/album...07_10_25_1.jpg

Close up of the Rocker Arms - .450 Offset

http://www.syborgtwinturbo.com/album...07_10_25_2.jpg

Offset Lifters

http://www.syborgtwinturbo.com/album...07_10_25_3.jpg

http://www.syborgtwinturbo.com/album...07_10_25_4.jpg

ps -- don't ask how much this cost and please don't tell the wife.

compared to the crank i bet it was a bargain

yep- that is the trutch

Good Morning All,

Guy over at Rockford Racecraft is kicking butt on my Engine.
www.rockfordracecraft.com

He is trying to get it together by the end of next week.

http://www.syborgtwinturbo.com/album...07_10_29_0.jpg

Just think that little engine is going to make some big Horsepower.

http://www.syborgtwinturbo.com/album...07_10_29_2.jpg

Man I hate to cover them up -- they look so nice.

http://www.syborgtwinturbo.com/album...07_10_29_4.jpg

The parting Shot

http://www.syborgtwinturbo.com/album...07_10_29_5.jpg

Thanks again guy for jumping in and getting this motor put together so quickly.

Good Afternoon All,

Okay we've done a little changes to the motor.
Guy pulled the old Camshaft out and installed the new John Meaney Spec'd cam.

http://www.syborgtwinturbo.com/album...07_11_01_5.jpg

Guy Installed the New Cometic Head Gaskets.
A Big Thanks to Mike Lee at RPM for getting them out so Quick.

http://www.syborgtwinturbo.com/album...07_11_10_0.jpg

Just like this picture

http://www.syborgtwinturbo.com/album...07_11_10_3.jpg

Measuring up for Push Rods

http://www.syborgtwinturbo.com/album...07_11_12_1.jpg

Opps - need to clean up this area a little more.

http://www.syborgtwinturbo.com/album...07_11_13_2.jpg

Okay - were not really sure why this wire is in the head.
It's been in every new Pontiac head I've ever had.

http://www.syborgtwinturbo.com/album...07_11_16_3.jpg

Pics of the Wire's

http://www.syborgtwinturbo.com/album...07_11_16_4.jpg

Josh over at Rockford Racecraft - making up some room.

http://www.syborgtwinturbo.com/album...07_11_16_7.jpg

Looking good.

http://www.syborgtwinturbo.com/album...07_11_16_9.jpg

Good Afternoon All,

Back From Sema and Kenny is hard at it.
The Rocker Cladding has been extensivly modified.
New mouting provisions have been made to ensure a good quality fit.

http://www.syborgtwinturbo.com/album...07_11_15_0.jpg

You can see Kenny is going to make this truck as straight as can be.

http://www.syborgtwinturbo.com/album...07_11_18_0.jpg

http://www.syborgtwinturbo.com/album...07_11_18_1.jpg

The gap between the bed and cab has been fixed

http://www.syborgtwinturbo.com/album...07_11_18_2.jpg

Just your token Blurry Kenny Davis Shot.

http://www.syborgtwinturbo.com/album...07_11_18_3.jpg

More to come next week