Use the img code. Not url

It took me min to figure it out to. I was able to fix two of them for you. You can use the last of the four codes listed and just cut and paste as one option. The other is when you are typing out your post there is a tool bar at the top. Select the icon I boxed in this example.

https://photos.smugmug.com/photos/i-...-rFNL6JP-L.png

There will be a pop up that looks like this:

https://photos.smugmug.com/photos/i-...-CLNP38W-L.png

Paste the link into that box and you're good to go. Make sure you delete the text highlighted in blue though. It's easy once you find the right button to push.

:captain:

Thanks for the help!

Cleaned up the underside then realized most of this sheet metal will be replaced due to rust.

http://i1368.photobucket.com/albums/...psqaxsl2j1.jpg


[IMG]http://i1368.photobucket.com/albums/...psjysvkcph.jpg[/IMG]

Detroit speed mini tub and new complete trunk floor

[IMG]http://i1368.photobucket.com/albums/...pshjg8eozm.jpg[/IMG]

Trunk floor was supposed to be Pre-notched.... turns out not so much..

[IMG]http://i1368.photobucket.com/albums/...psep4bbyv2.jpg[/IMG]

Need about another 3/4" to an inch on each side

In hindsight I would not have done the entire trunk floor... such a pain


[IMG]http://i1368.photobucket.com/albums/...psk2ocfblw.jpg[/IMG]

http://i1368.photobucket.com/albums/...psp00zs0fa.jpg

[IMG]http://i1368.photobucket.com/albums/...psx7rnghdl.jpg[/IMG]

more parts just arrived, :ups: Not sure how I want to tackle the inner rocker yet


[IMG]http://i1368.photobucket.com/albums/...pskd9sljru.jpg[/IMG]

[IMG]http://i1368.photobucket.com/albums/...psoewhhk1u.jpg[/IMG]

Playing with Soidworks and working on the geometry for a 3 link, going to build it my self (Maybe)

[IMG]http://i1368.photobucket.com/albums/...pslmodnqrw.jpg[/IMG]


[IMG]http://i1368.photobucket.com/albums/...psgzmzaazi.jpg[/IMG]

Our Torchmate plasma seems to do a good job with these parts, nice and square and consistent. test pcs out of crappy HR plate,Just bought a sheet of 3/16" P&O for the actual parts.

Heck yes it fits!