Lateral-g Forums - 1969 Camaro Restomod Project Thread

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 1969 Camaro Restomod Project Thread (https://www.lateral-g.net/forums/showthread.php?t=28470)

Quote:

Originally Posted by will69camaro (Post 647805)

Gave up on the headliner sadly. Just wont fit over the roll bar. Will be sold and I'm going with a conventional style roll bar.

Small update. Got the headlights installed and wired up, horns wired up too. Need a hub puller so I can hook up the turn signal arm to ensure those work, and to hook up the horn button. May try to get that tomorrow, as well as a few other things.

Now to pics!
Headlights installed.
http://i.imgur.com/5416acS.jpg

Horns Installed.
http://i.imgur.com/ultwEwH.jpg

Wired up the lights and installed some front paneling (header panel). Pushed it out of the garage for a bit of sun, and to clean the garage as it has become a mess again!
http://i.imgur.com/7xVWuVc.jpg

http://i.imgur.com/yc5iVZb.jpg

Let there be light!
http://i.imgur.com/wuY4gj1.jpg

http://i.imgur.com/UsEZ1uG.jpg

http://i.imgur.com/vfLS93X.jpg

Light gives off a pretty decent pattern.
Off
http://i.imgur.com/PLH8PlJ.jpg
Low Beam
http://i.imgur.com/aCU6GOE.jpg
High Beam
http://i.imgur.com/AYpVJln.jpg

Started on the carpet also!
http://i.imgur.com/hozg5aN.jpg

http://i.imgur.com/YIzjq5M.jpg

More to come tomorrow!

Awsome build man. Just wondering where you purchased the lights from. Did they come with relay and wiring kit as well?

Quote:

Originally Posted by ryanleiker (Post 653438)

What's your instagram?

Same as here. IG: Will69camaro

Quote:

Originally Posted by 72Z/28 (Post 653449)

Awsome build man. Just wondering where you purchased the lights from. Did they come with relay and wiring kit as well?

Lights are from Amazon, they're Trucklite 27270C I believe is the part number. Wiring is factory, plugs directly into factory harness. The lights do stick out past the bezel a bit. I find it's less noticeable with the bezels that have the chrome surround.

I am not running them through a relay currently. They run 1.80amp (low beam), 3.60amp (high beam), so the switch is rated for well above that. No issues so far but haven't used them too much yet either.

Will, did the headlight buckets need to be modified much to get the lights in there?

None at all. Mod if you want to bring them back or further in. I didn't bother.

Quote:

Originally Posted by will69camaro (Post 653477)

Thanks for the quick reply. I went a head today and placed an order of the trucklite 27270C headlights.

Also regarding the momo steering wheel, did you go with 320mm or 350mm size?

Coming along nicely!

Quote:

Originally Posted by 72Z/28 (Post 653499)

Thanks for the quick reply. I went a head today and placed an order of the trucklite 27270C headlights.

Also regarding the momo steering wheel, did you go with 320mm or 350mm size?

Sorry for the delay. It's a 320mm.
https://www.amazon.com/Momo-RCE32BK1.../dp/B00PY3J7IY

Quote:

Originally Posted by JohnJ@RideTech (Post 653507)

Coming along nicely!

Thanks!

Driveshaft has been dropped off to be shortened slightly. Will be ready tomorrow, will re-install, change rear springs out as i'm maxed on existing ones and still settling here and there.

Glass install is ongoing. I need to get after it and get that finished. Waiting on a couple small misc parts to show up for door weatherstripping.

Cars and coffee today was good. Still no sideglass so I stuck by the car the entire time.

http://i.imgur.com/P4XxJXx.jpg

http://i.imgur.com/Tg3sjG8.jpg

http://i.imgur.com/ZrMXkm1.jpg

Car looks good Will. Were you at Memorial City mall cars and coffee?