Yes that's him Greg.

Mark, would Ryan sell me a connector for the Delphi ABS module?
If so, could you post or PM me his contact info?

Thanks

Keith Quinn

I'm obviously not an engineer so I'm just trying to comprehend how much time it would take me to plan-out a complete wiring system, starting with just wire, a fuse box, and a bunch connectors... I'm guessing a full week of just drawing the schematic, another week to plan-out routing, probably 2 weeks to install all the connectors, and another full week for complete installation! I cant say it doesn't look like fun, though! Any tips you feel like posting for this part of the project will be much appreciated, Mark!

In other news...wire stocks rose.


:thankyou:

Mark, if your car already has provisions for wheel speed sensors what would be a good cost estimate to install ABS? I know you need wheel speed sensors, some sort of controller and some wiring. I am surprised no one is offering a kit yet, at least that I have seen, my guess it is a concern of liability that is preventing a retail solution.

Keep up the great work, cant wait to see the next update.

wow...

Wow indeed!!! You guys have got your work cut out for you!!!!

Engine harness is done. Working on body harness now.

Mark

lets see it...unless its

I got tired of wiring so I'm working on my diff and transmission cooling. I'm using a set up from a ZL-1 to cool my diff. I had D&D performance modify my Tremec T-56 Magnum to accept a stock TR6060 oil pump. I will use that mechanical pump to pump transmission fluid to the radiator to cool it in a oil to water oil cooler in the end tank. Then the cooled trans fluid gets pumped to the back of the car to go to a oil to oil diff cooler. I'm using the stock ZL-1cooler (part number 20931169). The trans fluid then goes back to the transmission.

We use this system on both the Z/28 and the ZL-1. It works great!

The CAD picture is the diff cooler in the Z/28. I used the ZL-1 cooler because it is 30% bigger.

So more OE tech in my hot rod.

Mark

Pay attention kids. These are the moments that will help seperate you from the pack down the road!

Great work Mark. I love seeing how you integrate OE tech into your Hot Rods!