Lateral-g Forums - This is MY 67 Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - This is MY 67 Camaro (https://www.lateral-g.net/forums/showthread.php?t=34830)

Not much of an update thou, got the rear end centered and was kinda bummed w the lower control arm location ... seems if you keep your leaf spring it's 42" c2c and if you flip the arms and weld on it's 40" c2c :bang: So I lost an inch of clearance per side using the perches .... these may come off before I'm done.

Used RT jig and centered the upper arm location, just waiting on my tranny ... should be able to pick it up today and get er bolted onto the engine.

http://imagizer.imageshack.us/v2/102...673/SOWDVL.jpg
Centered and set!

http://imagizer.imageshack.us/v2/102...538/eWxYWj.jpg
RT's jig for the upper arms

http://imagizer.imageshack.us/v2/102...661/LyRbRQ.jpg
Lost wheel clearance w the bars on the perch vs welded on :bur2:

http://imagizer.imageshack.us/v2/102...538/SrHsp3.jpg
My new acquisition!

Should get the tranny today but then it's off to elk camp for a few days ... hopefully get things going next week when I return ...

Have a safe Halloween, thanks for looking ...

It looks good Chief keep plugging away.

Quote:

Originally Posted by coolwelder62 (Post 577591)

You can get the rear sway mount/support brackets tabs from Ridetech if you have an older air/bar setup.

Thanks

Man this project is really moving along. You have a better work ethic than I do !

Quote:

Originally Posted by SlowProgress (Post 578552)

Man this project is really moving along. You have a better work ethic than I do !

I am between school semesters and had to move quick to get things going .... school started yesterday so things will slow down some.

Quote:

Originally Posted by waynieZ (Post 578325)

It looks good Chief keep plugging away.

Thanks

:thankyou:

Picked up the 4L60E on Friday and got her cleaned up a little .... at least its respectable to put under the car now! My roll bar came in :ups: ... looks good too! What I liked was Wild Rides already fish mouthed the bars and was fitted to a 67 Camaro, I just need to trim the height of the main hoop and trim the trunk bars; still contemplating the harness bar ... WELD IN or REMOVABLE, Wild Rides just tacked it in place.

http://imagizer.imageshack.us/v2/102...674/Py0hZF.jpg
Cleaned up the 4L60E!
http://imagizer.imageshack.us/v2/102...913/TEIjZq.jpg
Roll bar is 1 3/4 .120 DOM!
http://imagizer.imageshack.us/v2/102...743/M6zFhF.jpg
Fish mouthed and test fit in a 67 Camaro .... NICE!

Not much of an update ..... school started and I will be preoccupied for awhile, need to get the tranny and engine together and get the rear end set.

More to come, thanks for looking ....

Sweet! good reference points.

Michael, I have an extra set of Ride Tech weld on lower mount's I will trade you for your bolt on if needed.

Quote:

Originally Posted by coolwelder62 (Post 579062)

Michael, I have an extra set of Ride Tech weld on lower mount's I will trade you for your bolt on if needed.

PM sent, thanks.

Does anyone have pictures of the weld on lowers for ride tech? I though the kit was bolt on, didnt know they had an option for weld on too?

Quote:

Originally Posted by SilverSS1969 (Post 579096)

Does anyone have pictures of the weld on lowers for ride tech? I though the kit was bolt on, didnt know they had an option for weld on too?

I believe these are the ones you are wanting.
http://www.ridetech.com/store/tri-li...e-bracket.html

Anyway you can update your pics in your first posts in this thread? They are not showing and I take it those pics were of what the car looked like when you got it. Would like to see that.