Updates
 

Tom is Installing and relocating Parking brake in the center side console along with cables

http://i700.photobucket.com/albums/w...9/IMG_0127.jpg

http://i700.photobucket.com/albums/w...9/IMG_0084.jpg

http://i700.photobucket.com/albums/w...9/IMG_0087.jpg

Now Running the Fuel Line with new clips to hold looks like it's Floating along the under carrage

http://i700.photobucket.com/albums/w..._0076JPG-2.jpg

http://i700.photobucket.com/albums/w...9/IMG_0104.jpg

More Updates
 

Special Thanks to Justin @ Wilwood was able to help us out to upgrade Calipers to the Six Piston
Rear
http://i700.photobucket.com/albums/w...9/IMG_0102.jpg

http://i700.photobucket.com/albums/w...9/IMG_0122.jpg

http://i700.photobucket.com/albums/w...9/IMG_0121.jpg

Front

http://i700.photobucket.com/albums/w...9/IMG_0099.jpg

Installing Brake Lines and proportioning valve

http://i700.photobucket.com/albums/w...9/IMG_0080.jpg

http://i700.photobucket.com/albums/w...9/IMG_0105.jpg

http://i700.photobucket.com/albums/w...9/IMG_0082.jpg

Nice work as usual. That's not a very good place for the ebracke clevis and cables. It can get pretty tight in the tunnel under hard accel.

Updates
 

A Sneak peak under the LS-2 Motor and Tremic Trans kit from Keisler Engineering

http://i700.photobucket.com/albums/w...9/IMG_0094.jpg

Tom Finishing up Polishing the Speedtech-Stainlessworks Headers and Exhaust 3' X pipe to the mufflers and 2.5 Over the rear axle, Tom Custom cut so it would clear the Chris Alston's Rear link Suspension

http://i700.photobucket.com/albums/w...9/IMG_0116.jpg

http://i700.photobucket.com/albums/w...9/IMG_0110.jpg

http://i700.photobucket.com/albums/w...9/IMG_0125.jpg

Look what else came in Ring Brothers New Hood Hinges Thanks Jim!

http://i700.photobucket.com/albums/w...Camaro_blk.jpg

The clvis and cables will have a shrould that cover them in the top of the tunnel.

Thanks,
Tom Argue

Update
 

Tom is also finishing covering the wiring harness!

http://i700.photobucket.com/albums/w...9/IMG_0119.jpg

Awesome work! :thumbsup:

Wouldn't work for me but I have mine fairly low in the back.

Car is looking good & coming along!:thumbsup:

Flush-Glass
 

Just received the replacement glass from (Flush Mount Glass System) by Classic Auto Glass Innovations! Thanks to Robert the other glass was a test fit.

http://i700.photobucket.com/albums/w...9/IMG_0131.jpg

http://i700.photobucket.com/albums/w...9/IMG_0135.jpg

http://i700.photobucket.com/albums/w...9/IMG_0137.jpg