looks great, is that a jaguar based rear end?

http://www.jcna.com/library/tech/images/tech0009b.jpg

if so watch for the roll oversteer

More updates...
 

It's been a while and the car is making progress. We have gotten some new parts in and wanted to thanks those who have helped....

Thanks to Muscle Rods for supplying the custom headers to work with our Heidts subframe....

http://farm4.static.flickr.com/3448/...3faf951b_b.jpg

And to Hoodlatches.com for their participation...

http://farm4.static.flickr.com/3656/...9e0fc55858.jpg

http://farm3.static.flickr.com/2584/...e74bea393a.jpg

Randy, what are you thinking that 6.0 is going to be at for HP?

6.0 H.p
 

Sorry about the late response been extremely busy,Wegner Automotive dyno tested the motor with just a carb & MSD timing controller. We made 581H.P & 515 Ft. LBS. TRQ. with the compression ratio of 9.5:thumbsup: :lateral:
Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

What size wheels and tires are they?

More updates...
 

Our 6.0L motor built by Wegner Motorsports is now installed...

http://farm4.static.flickr.com/3484/...6bc7ed8d7a.jpg

Thanks also to Chris Sondles and Soff Seal for their contribution with the seals used on our project...

http://farm4.static.flickr.com/3470/...7c5e3b63f6.jpg

And "Project Re-Peeled" in it's final assembly stage...

http://farm4.static.flickr.com/3490/...84da3537b5.jpg

Any build isn't complete with out a little help now and again... Here is the D of D&Z, Dylan Johnson helping painting some parts for dad....

http://farm3.static.flickr.com/2656/...e417c1c2b0.jpg

And also the Z of D&Z, Zoey Johnson helping dad with the wiring...

http://farm3.static.flickr.com/2421/...589d005f26.jpg


:thumbsup:

Very cool. Car is looking good and almost complete!
It's good to have some helpers!:thumbsup:

X2!!^^


What steering column is that you are using?

Ididit
 

Thanks for the response, the steering column is from Ididit. It doesn't have a key in it, I chose to relocate the ignition switch.:thumbsup: :lateral:

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Great build! Nice to see cool 2nd gen builds on the site.:thumbsup: