Nice! :thumbsup:
Mark, what's the rod running at an angle just in front of the stock fuel tank location? A panhard bracket stiffener?

Mark, we've read on Lat-g how great 'X' rides and handles.

Any changes you're going to make to this car as far as the suspension tuning goes?

looks great Mark. Some day we're gonna have a talk about those red and blue hose ends....................:P

Jody

Well I had the a few red and blue "in stock" at home so I used them. All the new one under hood are black. Maybe Santa will bring me some new black ones. :lol:

Thievery...!
 

Love the build, just stole some killer ideas!!!

Gonna fill out a theft report and I am the suspect!

Keep up the great work!

I have a Sharpie if that helps. :D :lol:

I dip those pesky red or blue anodized fittings in DRANO CYRSTALS and WATER mixed up in a plastic bucket - only takes a very small amount to do one or two at a time... but you can only use CRYSTAL drano... it's sold in a small black can with a red plastic lid. About $3 for a can of it.

Dunk that fitting in there hanging off a piece of welding rod - swish it around and rinse it off in fresh water - and polish it right up.

If you make the solution too strong - it will fizz and boil and you better be quick on your dip! Also DO NOT PUT THIS CLOSE TO YOUR FACE either - the fumes are more than nasty! Make it too weak and it takes forever... after a couple of batches you'll get the hang of it.

EEEEEEEEHHHHHHHHHAAAAAAAAAAAA

Yes I added a panhard rod stiffiner and tow hooks on the axle while I had the welder out.

http://i439.photobucket.com/albums/q...5/DSC_2821.jpg

The car it turning out very nice all the DSE stuff is nice and fits well.

Stielow

Nice ride...as usual
 

Rearend cooling pump there on the right mount?

OK I'll buy some more black ones. AN fittings are more expensive than a meth habit. A bag always cost me $100. Then I have to go back in a few days and buy more........ :_paranoid

Stielow