That's the same thing they told me. A little daunting to start cutting up those inner fenders. I am planning to use 3M 8115 panel adhesive to bond mine together.

Thanks,
Don

Almost a year. I'm still missing the lower valance too.

We've been slow at work so I've been playing with the Camaro. So far I've finished both roof/A pillar transitions, built another recess box for my InfinityBox module, and started on my rear bumper mounting and modding. Now to the pics

Driver side is the same
http://i25.photobucket.com/albums/c8.../image_76.jpeg
http://i25.photobucket.com/albums/c8.../image_74.jpeg
http://i25.photobucket.com/albums/c8.../image_75.jpeg
http://i25.photobucket.com/albums/c8.../image_77.jpeg
http://i25.photobucket.com/albums/c8.../image_79.jpeg
http://i25.photobucket.com/albums/c8.../image_78.jpeg
http://i25.photobucket.com/albums/c8.../image_80.jpeg

I've been working on this rear bumper trying to get it how I want it. I'm close now, just needs a few tweaks on the driver side then I'll be happy. I wasn't too concerned with getting the metal work perfect as I'm going to make a mold from this and do it in carbon fiber.

http://i25.photobucket.com/albums/c8.../image_89.jpeg
http://i25.photobucket.com/albums/c8.../image_83.jpeg
http://i25.photobucket.com/albums/c8.../image_82.jpeg
http://i25.photobucket.com/albums/c8.../image_88.jpeg

I also got my holes cut to mount the hood vents
http://i25.photobucket.com/albums/c8.../image_87.jpeg
http://i25.photobucket.com/albums/c8.../image_90.jpeg
http://i25.photobucket.com/albums/c8.../image_86.jpeg

And I got part of my tail lamp housing from the 3D printer
http://i25.photobucket.com/albums/c8.../image_81.jpeg

Are those hood vents from anvil?

Car looks good.

Thanks. Yes they are. I got the fiberglass ones since I was going to paint them and they weighed the same as the carbon fiber ones.

Just a quick update. I've been working on the body work aspect of the bumper as I want it as perfect as I can get it to make a mold from. Now that I have it really close I started with the fill pockets with tape patterns then marking where I want the body line.
http://i25.photobucket.com/albums/c8.../image_91.jpeg

The driver side looked to be the harder side to do because I cut a little more than I meant to, we all make McSteaks. Just a little more welding to do, but it's slow as to not warp any metal.

http://i25.photobucket.com/albums/c8.../image_92.jpeg

I finished up the driver side bumper recess today. I'm pretty happy with it, but it's not perfect.
http://i25.photobucket.com/albums/c8.../image_93.jpeg
http://i25.photobucket.com/albums/c8.../image_94.jpeg
http://i25.photobucket.com/albums/c8.../image_96.jpeg
http://i25.photobucket.com/albums/c8.../image_95.jpeg

Very nice and tasteful modifications. I'm digging how this project is coming together!

Thank you.

I got a lot done Friday night. Finished the right bumper recess then moved onto other tasks. I cut the seams for both quarters to tail panel then hammer and dollied the area to fit better then it was. After I was happy with the fitment I welded the seams for a cleaner look.
http://i25.photobucket.com/albums/c8.../image_98.jpeg
http://i25.photobucket.com/albums/c8.../image_97.jpeg
http://i25.photobucket.com/albums/c8...image_100.jpeg

I also filled the factory emblem holes then hammer and dollied the area and metal finished it.
http://i25.photobucket.com/albums/c8.../image_99.jpeg

Saturday I wasn't feeling like working on the car, but I got the Ring Brothers trunk hinges mounted so I could start fitting the deck lit to fix the gaps. Sorry, I forgot to get a picture. I also added some safety to the car in the form of a C6 3rd brake lamp. Lots of measuring, remeasuring, cutting, hand filing, and hand sanding. I'm pretty happy with how it came out though.
http://i25.photobucket.com/albums/c8...image_101.jpeg
http://i25.photobucket.com/albums/c8...image_102.jpeg