Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Scott Mock's 66 Chevelle Build. (https://www.lateral-g.net/forums/showthread.php?t=38292)

coolwelder62 08-22-2013 02:46 PM

Marty PM your pirate #.I will have my people call your people!!!!!!:lmao:

Evan Iroc-Z 08-23-2013 07:14 AM

Quote:

Originally Posted by coolwelder62 (Post 500765)
Marty PM your pirate #.

Hmm a pirate number? Like "AARRRHHH AARRHH AAAAARRRHH - AARRRRHH AAARHHH ARH ARH" Mine is RUM:30. :lol:

I know you don't know me but I couldn't resist.

GrabberGT 08-23-2013 08:18 AM

Quote:

Originally Posted by coolwelder62 (Post 438846)
Going to build a little alum. trailer 4'wide x5' long out of 3x3x1/4 alum angle,single 2000#axle.It will have 2 Alum. tool box's 24'w x60"L x18" h.That way I can haul our Tool's,Jack,jack stand's,Cooler,nitorgen bottle,EZ-up,Folding Chair's,Spare set of race slick's for GG's auto cross.And of course the most important thing of all(BAR-B-Q GRILL).

So now that its done... You bringing this rig to Lonestar?

syborg tt 08-23-2013 08:19 AM

Quote:

Originally Posted by Evan Iroc-Z (Post 500912)
Hmm a pirate number? Like "AARRRHHH AARRHH AAAAARRRHH - AARRRRHH AAARHHH ARH ARH" Mine is RUM:30. :lol:

I know you don't know me but I couldn't resist.

Evan you Rock or should I say I Roc

coolwelder62 08-23-2013 03:35 PM

Quote:

Originally Posted by GrabberGT (Post 500927)
So now that its done... You bringing this rig to Lonestar?

It isn't all done yet.Still lot's of little thing's to do.Ken Vervnyck is coming by tomorrow to start the wiring.Brian Kellison said he might stop by to finish up some of trim work for.I've been building a roll cage in a FWD-SAAB this week should have finished tomorrow.Owner want's to take it to Booneville in sept.I don't know if the chevelle will be in Texas GG but I think kevin might come down.Will try and :gitrdun:

coolwelder62 10-02-2013 05:33 AM

Sorry Guy's,I've been a little side tracked.Should have some update's in a week or so.!!!!.I am going to try and start spending eves & week end's to get the chevelle finished up.Shop's been swamped with work.Will try to :gitrdun:

syborg tt 10-02-2013 07:32 AM

Hi Scott

Any chance you have the iPod doc that you made for this dash available ? Could really use one for my dash on the Camaro.

coolwelder62 10-02-2013 07:55 AM

Quote:

Originally Posted by syborg tt (Post 508131)
Hi Scott

Any chance you have the iPod doc that you made for this dash available ? Could really use one for my dash on the Camaro.

It's not a Ipod dock.It's the controllor for the custom auto sound radio.I'm smart enough to use an Ipod.

GregWeld 10-02-2013 08:02 AM

Quote:

Originally Posted by coolwelder62 (Post 508134)
It's not a Ipod dock.It's the controllor for the custom auto sound radio.I'm NOT smart enough to use an Ipod.



Fixed it for ya Scott..... :D

syborg tt 10-02-2013 08:05 AM

1 Attachment(s)
Quote:

Originally Posted by coolwelder62 (Post 508134)
It's not a Ipod dock.It's the controllor for the custom auto sound radio.I'm smart enough to use an Ipod.

That is exactly what I am looking for and Greg thanks for fixing his post

http://www.casmfg.com/Secretaudio.htm

here are the spec just in case anyone else is interested.

Hideaway 200 Watt AM/FM CD controller with USB MP3/WMA Flash Drive, iPod interface and more. Featuring “RF” (radio frequency) remote control. Ideal for Streetrods, Classics, Customs or any Vehicle! Leave original radio intact! The tuner/amplifier unit (black box) can be hidden out of site (under seat, dash or trunk) . We have even included the iPod docking cable (iPod not included).

Features:

• AM/FM Stereo 200 watts 4x50
• RF Remote Control (radio frequency no line of sight required, up to 40' range)
• USB MP3/WMA Flash Drive Player
• iPod® Direct Control Interface (built into tuner/amp unit) 7' iPod Docking Cable Included
• Alpha Numeric LCD Display Shows Artist / Song Titles for USB, iPod® and Satellite Radio
• Satellite Radio Input (for optional Sirius® satellite radio tuner)
• Direct CD Changer Control (6CD changer or single CD1 optional)
• Auxiliary Audio Input
• 4 Channel 3 Volt RCA Pre-Outs (for optional Amplifiers)
• Subwoofer Pre-Out (for optional Subwoofer Amplifier)
• Electronic Volume, Bass, Treble, Balance, Fader
• 5 Selectable iEQ Curves – pop/jazz/classic/beat/rock
• Zero Memory Current Draw (will not drain car battery when unit not in use)
• 24 Station pre-sets (18FM / 6AM)
• Power Antenna 12V Trigger Lead
• Blue LED Illumination on Buttons and LCD Display with Contrast Control
Options for Secretaudio
6 disc CD Changer
1/2 DIN Single CD/DVD audio/mp3 player

coolwelder62 12-23-2013 06:37 PM

bump!!!!

coolwelder62 12-23-2013 07:44 PM

Quote:

Originally Posted by Jamess113 (Post 524612)
What kind of update is this?????? LOL

I cant the new photo to upload on my new PC.So I did to only thing I could think of LOL!!!!

HEEP 12-24-2013 03:40 AM

Well, that was a let down. HAHA

Bill

Jr 12-24-2013 10:01 AM

Quote:

Originally Posted by coolwelder62 (Post 524609)
bump!!!!

That's funny.

fleetus macmullitz 12-24-2013 11:12 AM

Quote:

Originally Posted by coolwelder62 (Post 524609)
bump!!!!

Aw dude! :shakehead:

The coal coming yer way is COD btw.


:tv_happy:

pokey64 12-24-2013 01:03 PM

Quote:

Originally Posted by coolwelder62 (Post 524609)
bump!!!!

Nominated for post of the year! :rofl:

coolwelder62 12-24-2013 02:19 PM

Sorry,Fella's.My PC with all my photo's crashed.The geek squad has it.And This new Dell suck's.So once again sorry.

Sales@Dutchboys 12-24-2013 04:28 PM

Come on Scott! Will we see the Chevelle this summer?

daign 12-25-2013 01:09 PM

Love your car. Its been in my Camaro Inspiration album since you posted the first build pix of it!

coolwelder62 12-25-2013 05:00 PM

Quote:

Originally Posted by DutchBoys (Post 524777)
Come on Scott! Will we see the Chevelle this summer?

As,soon as it's finished I putting it up for sale.

Rick D 12-26-2013 05:41 AM

Quote:

Originally Posted by coolwelder62 (Post 524897)
As,soon as it's finished I putting it up for sale.

Man how about driving this one around a little :poke: before you sell it??

coolwelder62 12-26-2013 07:35 AM

Quote:

Originally Posted by Rick D (Post 524938)
Man how about driving this one around a little :poke: before you sell it??

If I start driving it I might want to keep it.I want a new Haas CNC mill. This way I can save the leasing expense's.

GregWeld 12-26-2013 08:07 AM

Quote:

Originally Posted by coolwelder62 (Post 524951)
If I start driving it I might want to keep it.I want a new Haas CNC mill. This way I can save the leasing expense's.




THAS A BERRY BERRY SMART MAN RIGHT THERE... <think Forrest Gump>

rixtrix1 07-04-2017 05:56 PM

Re:'66 CHEVELLE BUILD
 
Just scrolled through your whole thread on the Chevelle build. Great work and everything looks good. I was expecting(hoping) to see something other than a fairly stock rear geometry, tho. The dash is killer! Thanks for taking the time to share your efforts!

JohnJ@RideTech 07-05-2017 05:42 AM

Lookin Good Scott!


All times are GMT -7. The time now is 06:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net