Good Morning All,

Last week Kenny took the bed over the Line-X Dealer.

http://www.syborgtwinturbo.com/album...03_07_KD_1.jpg

The underside and topside have been sprayed for protection from road debris.

http://www.syborgtwinturbo.com/album...03_07_KD_2.jpg

I was asked earlier what the little notches were for on the front of the bed.
These were put in to clear the hardware that attaches the rollbar legs to the cab.

http://www.syborgtwinturbo.com/album...03_07_KD_3.jpg

Should have more pictures later in the week

Looks killer Marty. Been following your build for along time. Nice to see some color on it. As always Kenny did not disappoint!!

Brent

Looks familiar.

Except yours is a bit smoother across the front (and inside the bed)...

http://s-seriesforum.com/albums/album272/Mvc_818f.jpg

I look forward to seeing it come together!!!

I got lucky and started with a brand new bed. I think from memory your color is more silver - this one leans more on the champaign side. lots of gold metalflake

03-12-08 Update - More miles then a Vegas Hooker
 

Good Morning All,

The Turbos are done and look really nice.
Both Guy and Precision Turbo really took care of me.

Guy & I started talking and we realized these Turbos have been shipped via UPS so many time it's just not right.
So here is a really long story -- see if you make it to the end.


So way back on June 25, 2004 I purchased custom Turbos from Precision Turbo.
www.precisionturbo.net www.rockfordracecraft.com

Precision Turbo shipped them to Rockford Racecraft. - 140miles

After Rockford Racecraft looked them over, he drove them to Competition Fabrication - 51 miles
www.compfab.com

When the truck was completed at Comp Fab they headed to my Shop - 54 miles

About 4 months later I loaded truck w/Turbos and headed to Recovery Room Interiors to meet Kenny - 601 miles
www.recoveryroomrodinteriors.com

Kenny Hauls truck, motor & those Turbos back to his Shop in Arkansas - 413 miles
www.kdhotrods.com

A short while later Kenny Ships Turbos back to my shop - 592 Miles
www.sportmachines.com

Then I ship Turbos to Rockford Racecraft so they could Polished and Hi-Temp all the surfaces of the Turbos. - 93 miles

Now here's were it gets fun ( if you've read this far )

In order to Hi Temp Coat the center section of the Turbo's you have to send the center section to Precision Turbo so they can take it apart - 144 miles

Precision Turbo - disassembles Center Section and Ships it back to Rockford Racecraft - 144 miles

Rockford Racecraft High temp coats the center section and then ships it back to Precision Turbo - 144 miles

Precision Turbo Reassembles the Center Section and ships them Back to Rockford Racecraft - 144 miles

Rockford Racecraft puts everything back together and then ships them to Kenny Davis - 617 miles
( really I hope this is there last Journey )

Now that's a lot of miles -- how many not sure it's late.

Okay so here are the Turbo's and yep there in the new bed on the new line-x liner.
Note the center section is officially Hi-Temp Coated Black

http://www.syborgtwinturbo.com/album...03_10_RR_0.jpg

The imperfections in the housing were tig welded prior to polishing.

http://www.syborgtwinturbo.com/album...03_10_RR_3.jpg

Exhaust Housing were done in a silver finish.

http://www.syborgtwinturbo.com/album...03_10_RR_4.jpg

Final Picture
yep - there they are sitting on that new line-x bed liner

http://www.syborgtwinturbo.com/album...03_10_RR_5.jpg

:cool: :cool: :cool: :cool: :cool:

Those look really nice!
 

And they have been around the block a time or two. I bet you have as much in shipping as they cost new. LOL

I can't wait to see this thing finished...I am sure your check book needs a break too. Just a fantastic project!

LOL - heck all of my checks have burn marks on them.

cad plated bolts = TITS!

yep there nice - however they are going to be removed and new Stainless Steel ARP 12 point bolts from "totally stainless" are being swapped onto the turbos.

So those bolts will go into my hardware collection