Lateral-g Forums
Page 89 of 92 « First 39798788 89 9091 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Camaro LT5 (https://www.lateral-g.net/forums/showthread.php?t=57667)

dhutton 12-07-2021 09:43 AM
Quote:
Originally Posted by andrewb70 (Post 716643)
What exactly does the input do?

Andrew
The top of clutch switch is used as in input to the ECM to briefly disable fuel when the clutch is depressed, which helps decelerate the engine and makes upshifting easier and quicker.

CarlC 12-08-2021 12:27 AM
Quote:
Originally Posted by Stielow (Post 716641)
It is the production Camaro throw out bearing
Gen4 LS F-body or??? That's what I've been using with good results.

Stielow 12-11-2021 12:01 PM
Quote:
Originally Posted by CarlC (Post 716653)
Gen4 LS F-body or??? That's what I've been using with good results.

Quote:
Originally Posted by CarlC (Post 716638)
Is the OEM throwout bearing used or the Tilton? I'm pretty skeptical on non-OE/non-preloaded TOB's but Tilton swears by their part.

Yes LS 4th Gen. Stock. Works good.


Sent from my iPhone using Tapatalk

Number1 12-18-2021 08:18 AM
Intercooler pumps
 
What does the c7 ZR1 intercooler pumps flow compared to others?

srode1 12-18-2021 09:46 AM
here's a chart comparing a few including the ZR1

https://fiinterchillers.com/tech_art...sting-results/

Jr 12-18-2021 12:06 PM
Quote:
Originally Posted by Stielow (Post 716409)

The new mufflers are "Hot Rod" quite. I am still looking for something quieter, but I'm getting old and I am tired of loud cars. I have tinnitus from all the louds stuff I have done all my life. I want my hot rods to be quieter.

Mark
Are you running borla or black heart mufflers?

Stielow 12-18-2021 06:00 PM
Quote:
Originally Posted by Jr (Post 716749)
Are you running borla or black heart mufflers?

Quote:
Originally Posted by CarlC (Post 716653)
Gen4 LS F-body or??? That's what I've been using with good results.

Quote:
Originally Posted by CarlC (Post 716638)
Is the OEM throwout bearing used or the Tilton? I'm pretty skeptical on non-OE/non-preloaded TOB's but Tilton swears by their part.

Yes LS 4th Gen. Stock. Works good.

Black Heart.


Sent from my iPhone using Tapatalk

130fe 12-19-2021 06:07 AM
Quote:
Originally Posted by Stielow (Post 716752)
Yes LS 4th Gen. Stock. Works good.

Black Heart.


Sent from my iPhone using Tapatalk
Mark, I am running the blackheart mufflers on my 68 (Holleys entire system for the Quadralink). I am getting an annoying exhaust drone from about 2-2400 rpm no matter what speed/gear. Are you getting the same?

CraigP 08-18-2022 07:05 PM
Alloy Diff Centre
 
Phenomenal build thread Mark!
I spent a good couple of hours going through it.
I have a question regarding your experience with alloy housings. I’m building a Pro Touring 1967 Fairlane hardtop, it’ll weigh around 3200lbs, have around 600hp and run a 6-speed, plus a pretty decent tire (315/30R18) on the back. Predominantly an occasional weekend toy with probably 3-4 track days (circuit) a year.
Strange talk about reduced life on the gears due to housing flex. Strange Engineering also did not recommend their alloy centre due to the weight – yet I’ve seen a host of cars running alloy centres. You’ve used them and have beat on them pretty hard – what’s been your experience?
Thanks in advance
Craig P

Jimbo1367 08-20-2022 01:10 PM
Over on YouTube, Lawrence LT Tolman has a how to video on this very subject.


The video is from Feb 17,2022, titled “ using SCIENCE to ELIMINATE exhaust drone: I finally did it!.

Hope it helps.


All times are GMT -7. The time now is 02:00 AM.
Page 89 of 92 « First 39798788 89 9091 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net