WE are back in business on the car. Deals are being made to get it back running. Need a motor, trans and some wheels and we are back in business. My baby has been in storage for a long time since I had the motor failure. Time to get her back going

:thumbsup: :thumbsup: Looking forward to seeing updates on it.

I was just wondering the other day what had happened to you Chad! Knew I hadn't seen you post on the forums in awhile... It's good to see some "locals"

I've been around. FAmily life has put a hindrance on building cars for quite some time. ACtually had to move all the customer projects to other shops. So happy to say I'm just back to doing what I love to do and thats working with no deadlines and when I want to. And working and building what I want , when I want

Well the wallet is getting lighter. Chris over at JCG cut me heck of deal on the 406 SBC and T56 he had laying around so he's crating it up to head to GA. Nicely built motor for a great deal. So drivetrain is done. PLaced a order for a set of Formula 43 RAD S5 in Autobahn black. Great company to deal with and very fast.
406 SBC- original Chevy block
9.1 compression ratio
Lunati Rotating assembly -internal balance
Professional Products Harmonic balancer
Splayed main bearing caps
AFR cylinder heads- 195
Crower Cam- Lift int 540 exh 565 Duration @.050 int 236 exh 244 LSA 114 deg Hyd/Roller
Cower Hyd/Roller Lifers & rockers
MSD Distributor
Aluminum water pump
Power Master High torque starter
Edelbrock Air gap intake with 750 HP Carburetor or DFI complete system
Racing engine Analysis - 526 HP & 526 TQ

LT1 /T56 Transmission Rebuilt by Rockland Gear- 20k miles on rebuild
Mcleod billet flywheel with clutch & pressure plate
ATS transmission support
Driveshaft
http://i1015.photobucket.com/albums/...n/IMG_1469.jpg
http://i1216.photobucket.com/albums/...learAno_01.jpg

406
 

That oughtta make the "Great Pumpkin" move out nicely! :thumbsup:

Did you grab the EFI too or going carby?

I got the EFI also

I got a truck bed load of parts in today from Summit. New Dynatech headers, MArch serpentine kit, and tons of other parts. Also got the DSE firewall fill panel and the Baer Tracker tie rod kit in. Wheels are in production and the motor should be shipping from JCG this week. We are blowing the car apart tonight to paint under flat black, going to Matte clear all the carbon pieces, and black out the bumpers and window trim and all the other stainless on the car

Without pictures... it just didn't happen! LOL

:ttiwop:

Pictures tomorrow of parts laying everywhere!!! Paint has been ordered and will be here Wednesday. Time to get rocking!!!