Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Speedtech Builds Karl's Camaro! (https://www.lateral-g.net/forums/showthread.php?t=55561)

AtomicFirebird 05-05-2018 07:35 AM

Than you for the information. The car looks outstanding

Ben@SpeedTech 05-11-2018 08:25 AM

Here's a look at the bottom side of that cool custom air intake, a trick air filter box that's fed from underneath away from engine heat. Also seen is the remote oil filter location, part of the set up with our road race and dry sump LS oil pans. Next up is a custom air dam and splitter that will help guide air to the filters and provide the necessary down force at higher speeds.

https://i.imgur.com/rXxjDa7.jpg

https://i.imgur.com/cHVQTtp.jpg

gnx7 05-11-2018 10:24 AM

Very nice work. In the driver side of the transmission lower drain hole is that a temperature sensor?

Tinker 05-11-2018 10:25 AM

That oil filter sure looks low. Maybe it's just camera angle, but I assume the air dam and splitter will be protecting it?

syborg tt 05-11-2018 11:49 AM

Ben I am removing you from my Friend list as this car has given me way to many idea's

Car is awesome and it looks like camera angle as the filer looks to be above the bottom of the frame.

Blake Foster 05-11-2018 12:12 PM

Quote:

Originally Posted by gnx7 (Post 677397)
Very nice work. In the driver side of the transmission lower drain hole is that a temperature sensor?

yes it is

Blake Foster 05-11-2018 12:13 PM

Quote:

Originally Posted by Tinker (Post 677398)
That oil filter sure looks low. Maybe it's just camera angle, but I assume the air dam and splitter will be protecting it?

the filter is about 3" above the bottom of the frame and when the splitter is on only the nut shows so you can get the filter off with out removing the splitter

Tinker 05-11-2018 03:10 PM

Quote:

Originally Posted by Blake Foster (Post 677406)
the filter is about 3" above the bottom of the frame and when the splitter is on only the nut shows so you can get the filter off with out removing the splitter

I had to ask. I assumed it was all good, I haven't ever seen anything half-a$$ed come out of your shop.
Car is looking fantastic!

Ben@SpeedTech 05-16-2018 07:17 AM

Here's some more pics to show what we've got going on...

The radiator support is in line behind the valance grills, airflow will go up through the radiator and down underneath to the air filters.

https://i.imgur.com/sBQ3x2Q.jpg

The air filters are in front of the sway bar and will be sealed off, guiding the air flow and keeping debris and such from the tires getting up in there.

https://i.imgur.com/EtZTwWe.jpg

The splitter will create down force at speed, seal the air box on the bottom side and help direct airflow under the car.

https://i.imgur.com/oUZazYy.jpg

Ben@SpeedTech 06-01-2018 08:12 AM

The interior's that coming together while the air dam is being fabricated. The back seat is kinda useless with the cage in the way so we made it a little more useful with the speakers taking up the back portion and functional storage compartments on both bottom sides.

https://i.imgur.com/Gx9WesB.jpg


All times are GMT -7. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net