Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   1978 Blazer (https://www.lateral-g.net/forums/showthread.php?t=57497)

Stielow 05-08-2019 06:43 PM

Quote:

Originally Posted by Try2paz (Post 692534)
Mark long shot but what are your thoughts on trying to make this all work in CA and Smog legal? My understanding is that you have to transfer the fuel tank and support EVAP from the original vehicle?



I’m no expert on CA emissions but if an E-Rod set is legal than this set up should be CA legal. Again I’m no expert.

It’s legal in MI... lol


Sent from my iPhone using Tapatalk

jeff71 05-22-2019 08:20 PM

Any updates? How’s it running?

Stielow 05-24-2019 04:44 AM

Quote:

Originally Posted by jeff71 (Post 692878)
Any updates? How’s it running?

Truck is running great. I have right at 1000 miles on it now. Driveline works flawlessly. I swapped the mufflers to get rid of a drone at 80 mph. We went though 3 mufflers until we have a system with no drone. Sound like a Denali now.

Still working on some 1978 Blazer issues like a noise from the A/C lines. I'll get it sorted out when I get some free time.

Love just banging around in it. I drove it to work this morning.

Mark

2L8IWON 07-13-2019 08:29 PM

1 Attachment(s)
Mark, it was GREAT meeting you today. Thanks so much for taking time to go over the salsa red with me and introduce me to Cerakote!

Blazer looked amazing! Very cool build bud.

Thanks again!
- Jesse

jeff71 07-13-2019 10:41 PM

When did Goodguys open the show to early 2000's Honda's.......?:EmoteClueless:

chetly 07-16-2019 02:47 PM

Quote:

Originally Posted by Try2paz (Post 692534)
Mark long shot but what are your thoughts on trying to make this all work in CA and Smog legal? My understanding is that you have to transfer the fuel tank and support EVAP from the original vehicle?

Shouldn't be a problem as long as you use the E-rod motor, computer and required equipment that goes along with it.

Stielow 08-04-2019 06:06 PM

https://uploads.tapatalk-cdn.com/201...7a82db7e5d.jpghttps://uploads.tapatalk-cdn.com/201...0c191c5015.jpghttps://uploads.tapatalk-cdn.com/201...7b45edefcd.jpg

Started a new project on the Blazer to add 2018 Tahoe brakes rotor, calipers, master and booster.


Sent from my iPhone using Tapatalk

Stielow 08-04-2019 06:19 PM

Same junk yard place I got the engine and stuff from.

First thing is convert the front rotor to 5 on 5 bolt circle.

https://uploads.tapatalk-cdn.com/201...b59f194e0a.jpghttps://uploads.tapatalk-cdn.com/201...8a09d2b3f3.jpg

Next is to make a bracket to add caliper to spindle.

https://uploads.tapatalk-cdn.com/201...41bd32d2b8.jpg

I had to make a template the convert that to a CAD drawing. Then a mock up part.

https://uploads.tapatalk-cdn.com/201...87a4ee7309.jpg




Sent from my iPhone using Tapatalk

Stielow 08-04-2019 06:22 PM

Final parts

https://uploads.tapatalk-cdn.com/201...e564505a98.jpghttps://uploads.tapatalk-cdn.com/201...cb720df447.jpg

Needs to be inside an 18 inch wheel

https://uploads.tapatalk-cdn.com/201...3a36516058.jpg


Sent from my iPhone using Tapatalk

Stielow 08-04-2019 06:25 PM

https://uploads.tapatalk-cdn.com/201...fd99ed6698.jpg

The hub is Kore 3.


Sent from my iPhone using Tapatalk


All times are GMT -7. The time now is 06:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net