WOW.........:unibrow:

What a great looking truck!!

Good Afternoon All,

So what does it look like outside in the Sunlight

I would say it Copper & Champaign, however Bob swears it's silver & red.

http://www.syborgtwinturbo.com/album...8_04_12_70.jpg

http://www.syborgtwinturbo.com/album...8_04_12_80.jpg

Sunlight? I see clouds :burnout:

I don't know what truck your looking at but that's silver and red dude. :rolleyes: Looks killer Marty can't wait to see it at the sew shop.

The truck is looking GREAT, but Im curious, what kind of plans do you have for the second gen? Any ideas at this time? Power plant; trans;wheels and tire sizes;etc? Thats really got my attention,. Tony

you and Bob would get along great. :unibrow:

wow - lots of plans. The goal with the camaro is going to be make it a really nice driver.

LS3 w/ overdrive - paddle shift
tons of body mods
recovery room interior with OE style trim

bunch of DSE stuff
Full Air Ride Suspension

and it must have a back seat for the kids


http://syborgtwinturbo.com/camaro/camaroRSX_trailer.jpg

Hi All,

It's all about the little details that no one may ever notice.

This is how the bed gap looks on a Stock s10 -- Not so good.

http://www.syborgtwinturbo.com/album..._28_05_003.jpg

Sliding the bed forward you can solve the gap problem.
However, you will need to stiffen the chassis to prevent the bed from twisting and hitting the cab.

http://www.syborgtwinturbo.com/album...5_07_05_15.jpg

Of Course this then leads to the next problem.
The bed is just a little wider then the cab.

http://www.syborgtwinturbo.com/album..._10_06_021.jpg

So off comes the bed.
Now it's time to drill out all of the spot welds that hold the bed sides on the truck

http://www.syborgtwinturbo.com/album..._10_06_032.jpg

Just a close up of the fun that Dave had drilling spotwelds

http://www.syborgtwinturbo.com/album..._10_06_033.jpg

It's not over yet - it's actually just beginning.
This is proof that you fix one problem and it just makes the other problems look worse.

You can see that the cab has an excessive curve to it - now that has got to get fixed.

http://www.syborgtwinturbo.com/album..._06_20_025.jpg

You can see that Kenny is hard it here.
This is proof that Kenny is an all around Builder.

http://www.syborgtwinturbo.com/album...07_08_19_2.jpg

Time to start slinging some mud.

http://www.syborgtwinturbo.com/album...07_11_15_0.jpg

The bed had to come off so you can see the work Kenny did on the "B" Pillars

http://www.syborgtwinturbo.com/album...11_25_KD_0.jpg

Now this is how it should have come from the factory

http://www.syborgtwinturbo.com/album...12_03_KD_0.jpg