2nd Gen Camaro/Firebird Billet Door Hinges
 

After years of fighting the doors on these second gens and tearing out the door hinges we have finally perfected our billet door hinge. They are bad ass looking and work awesome. Three years in the making to bring you an original part that works = that's the Ringbrothers difference.
A set of 4 hinges sell for $500
I will have stock in about 8 weeks - as you can see by Mike's red crayon we have one modification to make yet.

http://i656.photobucket.com/albums/u...oorHinges3.jpg
http://i656.photobucket.com/albums/u...DoorHinges.jpg
http://i656.photobucket.com/albums/u...oorHinges2.jpg

69 Camaro?

Greg

Wow! I will almost certainly be in for a set of these...

Have you had a set on a car for any significant length of time to determine how well they will withstand the weight of the doors over time? Those suckers are heavy!!!

:cheers:

jim call when ready. need one set.
thanks rick k:thumbsup:

Been tested for a long time - they will not have the same issues a the stock hinges. That's why it took us so long to get them done.
Other notes:
They have the indent so the door will open half way and stay there.
They come pre-greased and you can grease them yourself.
Let me know if there are any more questions.

Thanks,

Staci

We need a set of those for the Triple Threat car we are building for SEMA! PM sent.
https://lateral-g.net/forums/show...=triple+threat

We were wrong on the lead time on these hinges. It is going to be another 12 weeks or more at this point.

Is it looking good for a September release? Ready to pull the trigger now on a set.

Any updates on these? Seriously thinking about a set :yes:

I am also interested in a set, any ecd?