2014 Camaro SS Brembo Calipers, Rotos, & Pads
 

Item Location (City/State): Oakland, CA

Price: $800 + shipping obo

Description: Fresh set of front & rear calipers, rotors, and brake pads off of a 2014 Camaro SS.

Front Calipers: 6 piston
Rear Calipers: 4 piston
Rotors: 14" rotors with oversized lug holes

Less than 5,000 miles on set, very good condition. I was going to install these on my 68 camaro but decided to go another route.

http://i455.photobucket.com/albums/q...o%20Brakes.jpg

:animated_bye_bye_em

How could I run these on my 70 camaro? I already have 4 disk brakes buy bigger is better

I'm actually running the same setup front and rear on my 69 Camaro.

I had to use a Baer backing plate and an oversized parking shoe to get the parking brake to work. But This setup is the best bang for the buck that I have found! Its been working awesome on my car.

What did you do for front hubs?

I used the stock drum brake hubs (actually the Kore 3 aluminum hubs, but the stock drum brake hubs work too). For the caliper brackets, I used LS1 Camaro conversion brackets and drilled out the holes since the Brembo caliper bolts are larger diameter.

I believe I did have the center hole of the front rotors honed out by a machine shop. But that was pretty simple and only cost about $50.

:bump: $750 + shipping

Brembo brakes
 

Hi my name is sim I'll buy them if I can make them fit a 70 Trans am 727-851-2787 I'll buy them today if that's the case

bump

:bump: $600 come take these

Any idea if these will fit behind a 17" wheel?