Dse Deep Tubs From 2.75 To 4.75???
 

I have been on Mikes custom cars web site looking at Kjells 69 Camaro. Can anyone tell me how he's getting these DSE Deep tubs from 2.75 inchs to 4.75 inchs ?? I can see in the pictures on album five that he extended the wheel lip,I understand this. But what I do'nt understand is ,did he narrow the trunk floor and frame rails?? to get the extra 2.00 inchs. None of the pictures show. Its such a perfect clean fit I would love to do this for the extra tire width and ride hight:yes:
Mario

If you look closely from pic 12 + you can see that the rails were moved inboard quite a bit.

I see THANX

Hmmm........




http://www.mikescustomcars.com/i/pro...Loever/506.jpg

Was going to e-mail him to see if he's going to produce these!! :yes:

How original.......

Extra large tubs
 

Hi Guys Mike is developing a st of frame rails to do what he did on Kjel's car. If you shoot him an email he can let you know when they will be ready. He did a slick job on the trunk floor too, to alot of people they won't even notice it has no well in it . Mike is doing my car I stink at posting pictures so Its not on here . Check under Wayne in projects section.
Wayne

The owner of this car ask to have this done. He like what Pasquel did with the Orion Camaro. I tried to get Mike to do the same for me not a chance,way to busy..Even asked Pasquel.If I could get someone to do this I would have it done in a second .

He PMed me saying they will be out soon ! Can't wait to get them. All the rest(trunk floors,deep tubs) in around October . And your right never notice the well gone . The guy is awsome :hail:

Thats why I brought my car from Ma. to him. I drove to N.Y. to see one he did and that convinced me he was the guy to do my car.
Wayne

New frame rails
 

I was just on Mikes custom cars website he has the new frame rails on his home page.
Wayne

Already PMed him ! Going to call him today!!!!

Did you see the price. $1100 that seems alittle steep to me. Most of us are planning on running a aftermarket 4 link. I think you would be better off using straight rails like the ones from 21st century and getting a different tank. With these rails that he has you still need to modify the trunk pan and get a aftermarket tank.

I really dont see the advantage. JMO

Well I like the factory look . Mikes parts are topnotch as it shows on his web site. I know that they are a little pricey compaired to the other rails, but I just do'nt like the generic look of the other rails thats just me! Also dealing with Mike has been awsome he takes time to answer all my PM's :yes: no bs!!
Mario:cheers:

Guys check out this pic of the new rails.
I really love what Mike is doing here, was going to do something similar myself but he beat me to it.

Mike's work is top notch.

http://i7.photobucket.com/albums/y29...1/MCCRAILS.jpg

Mike says you can fit a 17" tire in a 69 Camaro with his new rails.:thumbsup:

Thats why I ordered mine! More is better!!!!!:lol: The guy awsome to deal with also..
Mario

Looks good! Do you have to use a c/o based suspension or will leafs with off-set shackles still work?

You can run leafs w/off set shackles up to a 315mm on 67-68 and 345mm on 69 .You will need to run a 4-link suspension to run a 355mm or bigger tire on 69 bodys.

________________

MR

Mike's Custom Cars can Fabricate all of your custom parts for your cars. MCC has been building cars for over 25 years. From Street, Pro Street, Pro-Touring, 10.5 Outlaw to Full Tube Chassis SFI 25.1E cars that run 200 MPH +.

MCC made this Frame Rails for guys that wood like to put a bigger tire than a 335mm in to there cars. MCC will have out soon there new tubs and trunk floors for the first gen Camaro & Firebird. More Pro-Touring parts coming soon.

www.mikescustomcars.com

Thanks,
Mike Riggs

If you look at Dwane Robinson car # 2 project you can see MCC new frame rails with a stock trunk floor( Album 4 pic # 29 - Album 6 ). Kjell car is the same way with a flat trunk floor.

www.mikescustomcars.com


Thanks,
MCC

I'm curious to see how a fuel tank and exhaust system fit with this set up.

MIke your work is totally out of this world!! I have not seen anyone performing better body work :bow: Thank you for sharing the pictures. I really enyou your website:cheers:

I just got through viewing some of Mikes work on his website. With all those photos, nothing is hidden. Awesome work. :bow:

You can always send Mike a e-mail he gets back to ya with any question! I have him building my floor with his deep tubs and flat floor so I can run my valance exhaust.
Mario

Thanks Mario. Do you plan to run a fuel cell inside your trunk? Doesn't look like much room for a fuel tank with that type of exhaust.

Mike

No Mike I'll have just enough room to for everthing under the car Mike has it all figured out..
Mario

That's very cool. I'd love to see some pics once the exhaust and tank are installed. That's going to be one very unique set up. Is Mike making a tank for you as well?

Mike