Pictures of 21st Century Street Machines rollcage
 

Here are the pictures that Ed sent of the 21st CSM rollcage. :thumbsup:

Rollcage pictures

Looks great! I like how the down tubes go through the dash, makes the cage really disappear. I would probably skip the door bars, or maybe have them set real low like in the mule.

By the looks of it they had faired it into the a pillar and eliminated the pillar molding. Am I correct?

Mike

The cage is certifiable for about anything you'd care to run NHRA,SCCA etc. That is why there are still compronmises in the hoop and the doorbars in regards to aesthetics.Jim tells me that as long as your strapped in he'll guarentee you'll walk away at 200mph. Seeing as he's built a myriad of cars that have hit the wall at 200mph I believe him. He won't make this guarentee with a kicked back hoop or a lower doorbar. He's also not prone to exaggeration.Thanks for the feedback. Ed

We have essentially made the bar part of the interiors A pillar trim.To give you an idea of how effective theis placement is I was out the day they installed the bars. I walked right past the car and then commented to Jim and Greg about when they were going to get around to it. The both gave me a blank stare and said they're in there!.Duhh... If you don't look closely they can be easily overlooked. I'm not always the most observant on the first pass anyway.lol.Ed

roll bar
 

hw repeatable is this rollbar going to be?? how many cars have one in it?? any feedback from people outside the company, looks real real nice.!!!
jake

It has been repeated several times now in our shop.It'll be the kind of kit that will require someone to have a little experience with fabrication.I'm not talking alot of experience but because we find substantial differences in the measurements between all the cars we do it'll require some massaging but no more than most kits.Development continues and once we have enough experience we can let others know where the rocks and snakes are. Ed

ed
 

sounds great but now, wheres the pricing!!!! let us know
Jake

Did ya'll have to cut the front down bar in half in order for it to go through the dash?

We don't cut the downbar.As far aspricing there was such a clamoring for photos I advanced them earlier than planned for product rollout and so product pricing still hasn't been established because as Steve has said this is a very labor intensive kind of roll cage. We've installed them in cars but are still learning what it will take to offer this as a type of production piece. I haven't yet been able to establish pricing for a production kit since things are still in development.Ed

I am very interested in this! Please keep us posted!

How much custom interior work does the roll cage require to put the interior back together? I am wondering how the A-Pillar covers will fit also what about installing the headliner and dash???

Trev

Ed,
what dia. is the tube and what is the wall thickness ? Is it DOM ?

From a previous post...

You won't use the A pillar covers, the bar with the sheet metal molding becomes the interior trim. A very light skim coat and apply your interior color. The way the headliner works is that a piece of foam will be glued up and sculpted to the bar in the roof again becoming part of the interior. The liner will then be put onto the foam. Best way to describe it would be an attempt to sculpt as much of the roll cage into the interior as possible. I'll keep things posted through Scott as we continue development. Ed

Hey Ed- Rob here... we spoke on the phone some months ago about this cage in kit form. Glad to see you are getting closer to production-readiness with it. When it's ready to fly, I'm ready to buy! :thumbsup:

-Rob

Scott,
Great Info. !!
Just What The Doctor Ordered...

Ed-
Just saw this for the first time.
I have to say your shop is doing amazing fabrication work. I love the blended A pillars into the cage. Great work.
Tyler

Damn I'm jealous. Don't show this to my chiropracter--he'll be pissed. We're all building 150mph capable cars, so roll cages are important. This design makes safety downright livable.

Note that my bent door bar/sill bar combination has passed both NHRA and SCCA tech. So you may want to look into this design. Getting out is way easier than with a straight door bar, but it still passes between the shoulder and elbow.
Very nice Ed.
/Steevo
http://homepage.mac.com/streetfytr/..../interior1.jpg

I definitely like that down bar. Thanks for thought.We'll definitely consider it. Ed

-
 

F70t/a, what was this post supposed to mean?

Really slick looking install. Would love to have something similar in my car.

What is the status of the kit in regard to production?

Wondering how much room remains under the dash on the right side. Is there enough space for a Vintage Air (or similar) unit?

...also, Id really like to see some photos of the headliner when it starts to take shape.

Thanks

...any progress here?

Not much more on cage right now. The remainder of the fab work is being done. We'll keep updating as things occur. Ed