Rushforth Livewires, Smoked Titanium, 20x12 *Pics*
 

Here is a set of Rushforth Livewires, brushed and clear coated outer,and Smoked Titanium centers.

Rear wheels are 20x12s, and fronts are 19x10s for a DSE front clipped and minitubbed 69 Camaro. The customer is all the way down in the Philippines!

http://i37.photobucket.com/albums/e9...ivewire009.jpg
http://i37.photobucket.com/albums/e9...ivewire010.jpg
http://i37.photobucket.com/albums/e9...ivewire013.jpg

www.RushforthWheels.com. Toll Free order line: 866-694-5940

Sick lip on those puppies Jon...:wow:

man i love that lip

Jon,

Those look awesome. Do you guy's plan to expand width sizes on 18" wheels as in 9-1/2" and 11" wide? Or is the 11" get priced out? The listings I saw were 9, 10 or 12" .

Sick Wheels!

We have 7, 8, 9 and 10 readily available in 2 piece 18s and can do 11s on up for special orders and take about an extra 2 weeks and if you absolutely have to have a 9.5, we can narrow a 10. We can also do 3 piece which will get your half sizes and additional widths.

Drop us a line anytime.

Damn i wish i would have known that i could have got a 18x11. Then i could have ran a 335.

Cause a 335 aint going to happen on a 10"

I wanted to go wider than 10" as well but, the 11" & up hoops are about $400 more per wheel. Correct me if I'm wrong Jay but, that's what I was told by Tim @ PRRC.

Oh, sick wheels BTW!
Only 1.25" deeper lip than mine if my calculations are correct. Life has been so super crazy I've bearly had time to even put rubber on them.

Thanks Jon for posting pics of my wheels for me. :D :thumbsup:

Thanks to Jason also. :)

Can't wait to see it in person.

Nice looking wheels!

$445 each to be exact but as these show and a bunch of others we've done, the option is definitely available.

Hey Jon,

where exactly in he phillipines is this car, I,m here in Manilla untill sunday for a wedding and bored stiff, i would love to go talk to a fellow pro-tourer and maybe see his car.

He's registered here, just ask him.
see below.

Rick, Manuel's screen name is TurboAWD and is the one who just posted this morning on this thread. I sent him an email to drop you a line so hopefully you guys can get together.

jason thanks I'll check it throughout the day, its 6am here now.
those wheels are bad ass, I feel my Bonespeeds are a little dated, i purchased them maybe 3 years ago during the build I,m considering a change now.

Manuel send me a PM if you like and maybe we can chat, I,m in QC across the street from Ateneo College.

No problem at all! Great looking set of wheels. They have shipped, and are on their way to you. I'm looking forward to seeing them on the car, so please, PLEASE, send pictures. :thumbsup:

Backspacing???
 

Awesome wheels!

What are the BS numbers on them?

Older post but...

What is the BS on those wheels ??

I'm going to be running the same tire and rim width........ I love a deep lip, but those might be alittle too deep for me....how deep of a lip is that ? I know the rim is 12 inches....

12 with a 5.5" backspace if I remember correctly....

So with the mount pad etc, how much of a lip does that create ?

I'm trying to figure out how big of a lip I want, then the BS and then have my rearend made....

It just depends on how much pad you require for the particular brake system you're running and we can tailor that and the lip for just the right look and fit for your car and your tastes.

That lip measures out about 5.5" but if you haven't had your rearend made yet, I would suggest ordering wheels with exactly the amount of lip you're after, mock them up in the car exactly where you want them and then measure between them to determine your rearend width. Either that or just take an exact amount from the stock width and factor it into what we use for stock backspacing and you'll be fine.