REDUCED PRICE!! LS7 Powered 66 Chevelle, '08 Car Craft SMOTY
 

I am selling my 66 Chevelle Popular Hot Rodding cover car, Car Craft SMOTY winner, & August Lateral-G feature car. The Chevelle is an example of some of the best products out there in a classic looking car. The car was done on a rotisserie to show quality standards, all the door, trunk , & hood gaps are awsome. The bottom of the car as nice as the top. I used a Schwartz chassis with Wilwood 6 piston 13in. fronts & 4 piston 12in. rears, all lines are braided stainless with stainless hardlines. I also used a Wilwood master cylinder for the brakes & clutch. I used double adjustable QA1 coil overs, Heim joints, & clevises. The steering is controlled by an AGR Performance rack. I chose to clone the car as a 66 SS 427 Chevelle so the best choice for power train would be a LS7 making 472 HP & 440 FT. LBS. tourqe at the rear tires,(have the dyno sheets). I wanted everything behind the engine to be able to handle more than what the engine put out so I installed a Rockland Standard Gear "Son Of Trazilla" T56 trans. The Colman racing aluminum drive shaft conects you to the aluminum centered Winters rear end with pressed & bolted axle tubes. The Randy's Ring & Pinion aluminum 3rd member houses a tru-trac posi unit with 4.11 gears which with the 6spd sends you down the road at 2000rpm at 75mph, getting 21mpg with the air on. The Rick's Hot Rods custom stainless tank with internal baffeling & check ball system (which helps keep fuel at the Walbro pump under hard G's)sends the fuel to the engine via custom stainless hard lines. The exhaust system starts with a custom set of Stainless Works long tube headers flowwing into a custom built 3in. exhaust with x-pipe & Stainless Works mufflers. The bottom of the car is covered in a satin black finish to enhance the beauty of all the stainless & aluminum pieces. The rear wheel wells have been 3in. mini tubbed to allow the use of 335-30-18 Michelins & 18x12 Kinesis K18 wheels with the centers anodized black. The front tires are 275-35-18 Michelins on 18x9.5 Kinesis K18's. The engine compartment is kept low on the bling & high on performance. I also painted it a satin black to enhance the stainless & aluminum. I used a custom BeCool radiator system with spal twin fans. The dry sump tank came from Peterson Fluid Systems & is a work of art. I chose a Wegner Motorsports accesory drive system & valve covers also covered in black anodized finish. I hid the wiring as much as possible along with the coils & hoses. I used a Detroit Speed Delayed wiper system, Knobs, & battery hold down. The interior was graced with comfortable Cerullo SC leather front seats & matced rear seat. The dash is a custom piece from Rocky Mountain Dashes with Stewart Warner Performance Gauges keeping tabs on the vitals. A custom counsil houses the Vintage Air Gen4 controlls, Alpine stereo, Hurst shifter, Lokar parking brake, & power window switches. The kick panels have been custom made to hold the Focal speakers in a fiberglass well. The entire car has been lined with sound deadening (the fire wall, floor, inside doors, quarters, trunk, & under the head liner. I have no complaints about this car, & I wouldn't change a thing. The car has a total of 2,500 miles on it. I am selling because I have a 70 R/S Camaro I want to build & a 66 Rambler also. The selling price for the Chevelle is $85,000.00. This car can't be duplicated at that price. Interested parties can reach me at 1-262-347-9741 or [email protected] . I will try to attach pictures if I can I am new to this, but you can look at pictures in the members section or grab a copy of Popular Hot Rodding(Nov. issue). I can also e-mail pictures to interested parties.

https://lateral-g.net/members/rjohnson

Thank You Randy

Sweet car , always loved it .
Good Luck with the sale !!

Thanks, but I can't keep everything & there are other cars to build. The person that buys this one will be getting one of a kind Chevelle.

Awesome car, good luck with the sale. :thumbsup:

Good Luck!

I would also list your car at www.chevelles.com

It probably would be the baddest chevelle listed.... If I had the $$$ I would buy it. a 66 would be a great addition to my 67. My brother was going to buy my chevelle and he backed out... Its a tough market out there.. Good luck and a great build...:thumbsup:

Blessings,

still available
 

I still have the 66 Chevelle for sale reduced price $115,000.00

CAR CRAFT 2008 S.M.O.T.Y. Back up for sale!!
 

Hi everyone I am putting the Chevelle back up for sale now that I have project "Re-Peeled" up & going. I have another project to get started on along with customer cars & am limited on space. I also could use the funds for the future project & more shop equipment. The price has been reduced to $100,000.00 which is a steal for this car. I think you would have a really hard time to duplicate it for that amount in parts alone not including labor. I will probably be posting it on Ebay & also on Cars-on-line.com :thumbsup: Attachment 21090

Attachment 21091

Attachment 21092

Attachment 21093

Attachment 21094

Attachment 21095

Attachment 21096

Attachment 21097





Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

That is a great looking car. Love the color scheme.
Good luck with the sale Randy!:thumbsup:

Randy I didn't know this was your car.

Very impressive looking car. I was up and under at the GG Joliet show last year.

Mist Blue
 

Thanks, I wan't to make the car look as much like an original as I could then have all the high tech & performance hidden under. I really like this car but I can't keep them all.


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

D&Z Customs
 

Hi Marty, The Chevelle was my first official D&Z Customs LLC. build. I had other cars that I built but I didn't have a business at that point.


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741:lateral:

Nothing like making a Statement on your first build.

Thanks
 

I really wanted to show the quality of our work in something subtle. I think we acheived it with this car. We now followed it up with project "Re-Peeled".



Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

You'll be in luck when that giant pile of cash falls out of the sky on me now that II Much and Camaro X are sold. :thumbsup:

Love the car, wish I had the $ to take it off your hands.

Feelin' like a Leprechaun
 

Luck of the Irish? Jeff You'll have to take a trip up & check it out before it's gone.:lateral:



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Ebay
 

The Chevelle is on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

good luck Randy, great car.

Thanks
 

Thanks Jody, I hope to get some serious interests.:thumbsup:



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Ticking down
 

Ebay almost done, lots of lookers.




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Hey Randy, I sure wish I was the guy with the funds for that car. Amazing machine to say the least. Best of luck with the sale. :cheers:

Thanks
 

I guess I will have to keep it a little longer if no one comes up with the funds.



Randy(D&Z Customs LLC.0
[email protected]
1-262-347-9741

Ho!Ho!Ho!
 

Nothing says Merry Christmas like a shiny Blue Chevelle!:D



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Please feel free to leave it in my driveway with a big red bow on it for Christmas morning !!!! :thumbsup: :lol:


Jason

Bank #'s
 

I will be happy to do so, just need to have bank account #'s to get sufficient funds for that really big red bow.:rofl:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

very cool car
 

Randy,

Awesome car. Good luck with the sale.

Chris

Do you mind I asked where did you get that air intake pipe that comes off the throttle body to the MAF.... the 90 degree one?

I'm looking for something like that but most of those are custom fabricated.

-Dan

Custom
 

Don't mind at all, I made the intake myself out of 4" aluminum pipe.





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Thanks.

I just wish I had all the tools to bend alum. piping. haha...

Randy i love your car hope the owner knows what they are really getting.Tons of time in the fab work.good luck.:thumbsup: :thumbsup: :thumbsup:

Thanks, it's a labor of love that we all have when we build these cars.:lateral:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

That doesn't describe enough the amount of detail that is in the car. Not only does it look great, it performs also. If I had the cash, it would be sitting in my garage.

Thanks Rob, I,m really happy how the car turned out I wouldn't change a thing. I also think it would look great in your garage next to the Olds.:lol:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

New Years
 

I still have the Chevelle for sale would make a great car to go into the New Year with!!:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Bump for you Randy...
 

Love them 66's and yours is amazing...:hail:

Anyone who gets this car will be a very lucky person. Great car Randy, good luck with the sale. I hope it works out for you.

Thanks Rob, I appreciate the comments it will be a great car for someone that will do it all (street or track).:thumbsup:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

2010
 

Ready to drive & have fun for the New Year come & get it!:lateral:





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

It's there waiting for you!

World of Wheels
 

The Chevelle is on display at Milwaukee WI. World of Wheels show at the Tremec Transmissions booth, come & take a look if your in the area.:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741