Which Intro wheel for my 69 Camaro
 

I'm down to these two...on my car www.mcspeed.com

http://www.hvydeez.com/images/pg_w_e...g-cube_500.jpg

http://www.hvydeez.com/images/pg_w_e...-rod_5_500.jpg

I have to pull the 9" and have it shortened by 5" - in 2004 I had it built and widened to accomodate the C5 rear wheels without spacers. The Vette wheels do nothing for this car...Just need to pick out the right set.

what's the car look like currently? My choice would be the top picture. :thumbsup:

I like the first one...it's tough a call though.

you can pull up dozens of pictures at www.mcspeed.com

The car has been finished since 2005. I finally going back and tweaking on somethings I glossed over at the time - like the wheels, seats, and other minor details.

I really thought i wanted a five spoke. but that first wheel is killer looking.

My vote if for the top wheel.......I am not big on the 5 spokes anymore. Show us some pics of that car!!!!!!

What size wheels? That top one could get a little busy in a small wheel. I still like a 5 spoke:D but not that one some much. Little street rod to me, but that's my pick.

18 front, 19 rear

top pic.

top pic X2

A classic 5-spoke design will always be timeless...but you're right,that one is screaming street rod to me too.
Have you looked at www.rushforthwheels.com ...?:rolleyes:

Chris I like the top wheel, but wouldn't do full polish. I see the center section darker or machine finish.

I think you should go with the G cubes.






I'm a little biased.

http://i73.photobucket.com/albums/i2...DSC_0030-1.jpg

X2 Rushforth wheels

Do you have a larger version of that picture?????

What size tires do you have there?

The tires are 295/35/18 in the rear and 235/40/18 in the front. I'll work on a bigger picture.

Looks good! Like to see more pics too.:thumbsup:

Here are some pics. I will post some after I lower next week.

http://i73.photobucket.com/albums/i2...c/DSC_0028.jpg

http://i73.photobucket.com/albums/i2...c/DSC_0030.jpg

Okay guys...still hunting. Still like the G cube...but am now looking at other options. So...what do you think of these? Either set will cost me about $3,800 shipped with tires. These are much more than the Intro...but a whole other look too. Here is the lat-g link to the car.


https://lateral-g.net/members/mcdonald69camaro/

https://lateral-g.net/members/mcd...9camaro/02.jpg

https://lateral-g.net/members/mcd...9camaro/04.jpg

I think the black center would look Billy Bad Butt on this...while the silver center would be neat and clean. The car needs a new attitude that it just isn't getting with the C5 wheels.

https://www.newstalgiawheel.com/imag...W_1414_500.gif

https://www.newstalgiawheel.com/imag...W_1422_500.gif

I like these two choice's better.

Thanks man...

does anybody know the exact maximum size and offset you can stuff in there on a stock suspension?

I get a little rub in the rear under hard turning or hitting bumps when I have the rear seat full of people - not enough to be an issue with the stock rear 18" C5 wheels

The front rub when I turn at a decent speed, or if I go into a drive or some sort of bump up. I assume 7" rim in the front with a 235 40 18 might stop that...but in the rear I would like to keep it maxed.

I'm going back to a stock width rear axle - would like to go 10 x 19 on the rim...and am curious about back spacing.

SWEEET! :hail:

Glad you're moving away from those C-5 wheels man...no lip is not a good look for these cars.

ummm how can i say it easy RUSHFORTH WHEELS :hail:

I don't see any there I like...maybe I'm missing something? Which one do you prefer?

i would tell you but then i would have to kill you but i think there website does them no justice at all rushforth wheels appear alot better on cars then what might be on there website do a search here and take a look at them. if you stay tuned i will post pictures as soon as my 1 off rushforth wheel come in shorty. if you like boze forgored i would look into the 6 spoke wheel seems to many guys have the 5 spoke just my 2 cent what other companies have you looked at???/ brandon

Okay...Rushforth...and bad to the bone:

http://www.rushforthwheels.com/image...edTitanium.jpg

Thanks for all the support, Brandon! I agree, our site doesn't do the wheels justice but let us know if you want to see some client's cars running the wheels and we'll flood your inbox. Hard to go wrong with our Rated-X on anything from a 55 Bel Air to a 2010 Camaro.
http://i256.photobucket.com/albums/h...els/KennyD.jpg
And here's the Super Spoke you were liking
http://i256.photobucket.com/albums/h...okeCamaro4.jpg

Great discussion ... and thanks for all the info.

Jason...your wheels are awesome.

Can that twin spoke be done with just the center powder coated and lip left polished?

Looking at this one now too. I know I can have this powder coated and bolts installed around the outside with the bright hoop/lip (polished).

http://www.hvydeez.com/images/pg_w_e...wler_5_500.jpg

We sure can. All our designs are available in any finish in just the center, just the hoop or like that Camaro with the whole wheel as well as without perimeter hardware. John just wanted to do the entire wheel in that finish on his car.

Here's a shot of a powdercoated center and polished hoops.
http://i256.photobucket.com/albums/h...ls/Rated-X.jpg

whoa scared me for a minute with the last picture and thought some was trying to let the cat out of the bag on my new wheels i have not even seen yet hahaha i am :willy: waiting on my wheels cause i know they will make my car stand out that much more in the end! i looked at 20 different wheels till musclecar john told me about rushforth and it was the best thing with john being so helpful at driverz inc with what i wanted and correct sizing for my chevelle i can't say much more till i get my wheels but i will be wearing a bip to catch the drool i heard. brandon

noooooooooooooo.....No more rated X's...LOL

The Rushforths are great...I have a set for my 55' chevy I am building. Can't go wrong! :thumbsup:

There are so many great choices out there. I enjoyed talking with Jason the other day.

I'm very close to pulling the trigger. I am battling both style and price as I move forward.

As mentioned before...I'll have to pull my axle and have it shortened back to a stock 69 Camaro width (Ford 9" with Moser axles) before this will go. It seems to be about a month to a month in a half for any rim to be made and shipped. The rims seem to all come from California too...and I'm clear across the country from them.

i know what your saying on wait time but look at it like this you know it is custom and not everyone has them!!!! i am waiting on my rushforths and to there knowledge mine have never been made for anybody but me makes me feel GREAT know i am the first one for my wheel!! so choose wisely my son :lol:

Go with the Rushforths I guarantee you wont be disappointed I used Rushforth rated X's and they are the nicest wheel I have used nothing wrong with intro's but I strongly recommend the rushforths just my 2 cents

just wait till they see my Rushforth next week probably like friday since coming from cali!!!! man i am going to loose sleep if you guy's keep talking about Rushforth Wheels.:thumbsup: to John for taking time when i call him up also, that what customer service is suppose to be :cheers: John.

brandon

Thanks Brandon, your wheels look awesome by the way... :woot:

Okay...I had never thought of the Rushforth until they were brought out to me on this thread...

BEAUTIFUL wheel - killer design, and wonderful telephone service.

Based on that...I think they are winners.

However...I ended up going with a different manufacturer. They are in the works...and will be one-off for my car. Therefore, I can't post a picture because they don't even exist yet! LOL

I was so torn as the Super Spoke quickly went to my number one choice after seeing them. You know though, picking the "right" wheel is like picking out the right engagement ring. When you see the right thing...you just know it.

Okay, hang on the typical 4-6 weeks...and I'll have something to show. Still have to yank my axle...blah, blah, blah so they will fit....

69, take one more look at the superspoke lol. Are you sure you don't want this. My car is sitting too high and they still look killer on the car.

Revive an older thread....

Decision made - wheels on order.

I narrowed the 9" rear axle BACK to stock width.

Got the axle in this weekend.

The wheels I went with are a one-off set for my car.

I'm still waiting on them...will post pictures as soon as I can.

this I gotta see...