More new parts from Anvil
 

Here are some pictures of some products we will have ready to sell soon.
We are coming out with hood vents that can be applied to any 1st gen hood (steel, carbon fiber or fiberglass). You just need to cut holes in your hood and screw on. Great for twin turbo set ups. The left side shows aluminum screen in the openings and the right side is open. The screen, of course, can be painted black if desired.
http://i219.photobucket.com/albums/c...ewParts008.jpg
http://i219.photobucket.com/albums/c...auto/vents.jpg
Here are our 1st gen spoilers available in high gloss and satin finishes and are made to fit all 3 years. They are patterned after the originals, but tightened up in the corners for a more refined look.
http://i219.photobucket.com/albums/c...ents-002_m.jpg
Here's our '69 gauge panel that will also be available in glossy and satin finishes. It is customizable with an optional 2 small gauge cluster that can go where the vent and/or HVAC panel would normally be. Lower areas for the wiper and lights are left to you to use whichever switchgear and locations you want. Two main gauge holes will fit 3 3/8" or 5" gauges.
http://i219.photobucket.com/albums/c...ewParts027.jpg
We have our 67/68 gauge panels in stock, but only in glossy for now.
http://i219.photobucket.com/albums/c...orparts013.jpg

the pics appear to not be working

Cowl Vent screen
 

Here's another new product. It's a screen that fits over the opening of the back of a standard cowl hood. We also have some to fit our "Bare" hoods. They come with the stainless button head screws. We have different aluminum screen material options too.
http://i219.photobucket.com/albums/c...odscreen-1.jpg

How much are the 67/68 guage panels?
Thanks

67/68 gauge panel= $225
69 gauge panel= $295, insert= $69
67-69 front spoiler= $275
Hood vents= $250 w/o screen, $375 w. screen
Cowl vent screen= $99 for standard hood (comes with brackets), $89 for Bare hood (which is designed with symmetrical screw locations)

Thank You, awesome stuff

Jason

is that cowl hood taller than stock?

do you think you'll have any shots soon of the hood vents, with the hood actually on a car?

I think I might be interested in those, but I would need to see it that way so I could get a better visual

Also, can the pretty much be cut in at any location on the hood?

I don't really "need" carbon fiber, but I've always wanted vents like those, and I never saw any before these

It's the same height as stock.

TJ,
Scott Mock put them on his '69 Sunoco Trans Am tribute car.

Damn it! I never even noticed that. I think I might even have a picture of that hanging up here in work. I'm going to have to go check

He didn't have them on the hood at first, but did at last year's Optima Ultimate Street Car Challenge.

Are you guys ever doing 69 camaro rocker trim?:yes: :yes: :yes: :yes: :yes:

http://i53.tinypic.com/34xrea8.jpg
http://i55.tinypic.com/iejhnb.jpg
http://i56.tinypic.com/22gd5g.jpg
http://i53.tinypic.com/ftiuk5.jpg
http://i52.tinypic.com/33lze4y.jpg

Tyler

That's been on my to do list for a long time along with the rear diffuser. Now that our Mustang build is finished, I can get back on my '69 Camaro build. We already have patterns for widened front fenders and a custom front valance. We will soon have 1st gen door sill plates as well as 67/68 inner fenders and a few other goodies to be announced!

One question.
What is the weight of your cf camaro hood (partnr:010002)?
How much lighter does it get if you cut out the inner structure?

Thanks!

Mikael

Our carbon fiber top with fiberglass understructure 1st gewn cowl hood weighs around 24 lbs. 100% carbon "Bare" (no middle understructure) hood wieghs around 17 lbs.

Any word yet on some A body parts? I've been good all year and asked Santa for some CF parts for Christmas!!:lol:

We have made them but they are on B/O at current. We have the 68-72 rear decklid, and the 70-72 Cowl hood, as well as A pillar trim, arm rest bases, and am SS dash overlay.

Tyler

mirrors?
 

What's the story on these mirrors?

http://www.lateral-g.org/events/sema2010/DSC_0083.JPG

Make some Mopar stuff dammit !! :)

Make this hood damn it! And start making some '65-'66 Mustang parts...

http://i366.photobucket.com/albums/o...A/DSC_0747.jpg

Matt

'65-'66 mustang parts... please!

x2!

Even thought the parts I need will never get built (just an A-body guy...)

Speaking of stuff I want, make this for a 67-69 Chrysler A-body but open up the front of the cowl to give it a bit of an SRT look...

Matt, will this fit a Goodmark cowl hood? I don't see it on your website, cost?

Yes, it should fit a steel reproduction hood. If it doesn't we'll give you a full refund and reimburse you for shipping.

Matt, Your hood is sh*t hot, but there's no way I want to mess it up by making a mold over it. Especially since it's aluminum! I appreciate the offer though.

Workin' on it!

We have GM as well as Ford sport mirrors in stock, but not yet up on our site. We are busy revamping our web site, but if you are interested, please give us a call. They are $499/pr.

how about the side scoops for the '69 camaros that went over the side gills?

did you guys finish the 68-72 nova dashes yet? and are you guys going to make one for analogue gauges and one for racepak?

We just got them in last Friday. It is a big blank area similar to the DSE dash, so you could do a RacePak or Autometers. Jeff- you need to call me, I have a set of A and B pillars for ya.

Tyler

When will pics be available of the A/B pillars and the dash for the 3rd gen Novas? I couldn't find any on your site.

Thanks

sounds good. ill be in touch soon. thanks tyler!

We haven't even taken pics of the A pillars yet, but I'll sneak you one of the dash.

This is the 68-72 nova dash. It has an optional lower steering column cover and can even be retrofitted to a 69 Camaro if you change the dash pad over to a Nova type. The 2 gauge pod inserts that we sell for the 69 Camaro dash, can be installed into this dash as well.

http://i55.tinypic.com/2ymahp3.jpg

http://i54.tinypic.com/2nqsl6q.jpg

http://i53.tinypic.com/167uhx5.jpg

Dash is $299 in Carbon and comes in both glossy and satin finishes.
The lower column cover (also works on the 69 dash) is $49
The 2 pod insert is $69.

Tyler

This is great to see!

Looks good Tyler and great price. Just to clarify one thing though...it will not fit a 68. The dash for a 68 is a one year only piece. 69-74 are the same.

Any plans on making some pontiac 400 hood scoops or side gill inserts in carbon "1968 firebird"?