WTB, piece of your old roof
 

Has anyone replaced their 67 f-body roof lately? If so, I'm looking for the passenger side front, fron the windshield corner back about 6 inches. It's the only bad spot on my roof, and I would rather patch in a piece instead of replacing the whole thing. Just thought I would ask before I try and fab something. Thanks :lateral: :cheers: :woot:

Still looking

Just picked up 67 parts car. Most of roof is bad, but I'll check passenger front corner.

Thanks, let me know. I'll post a pic of the area when I get a minute. :bow:

Hey Bro, sorry i took so long to get back with you. That section is no good on my parts car. I'll keep an eye out.
Scott

That's o.k, thanks for looking. I have plenty of other sheetmetal work to do before I get to the roof. :thumbsup:

How Far Out Across Windshield?? May Have What U Need Jim

Here are some pics with reference to size. 2 inches in from the pillar should work. Thanks!

Ok Let Me Look=buddy Has Parts Car Jim

Thank you :hail:

I have a 69 bird I can probably cut it out of.

I'm interested, PM sent

I will look closely at the roof this afternoon and make sure that area is good.

I will be replacing my roof soon to get rid of a sunroof.

Cool, Musclerodz and swapmeetcrazy are both looking. I'm waiting to hear back.
Thanks!

my buddy's is good but i think he wants to sell whole car --floor's bad-will get pics this wkend -see what he wants to do-car's in s. lousiana car will be cheap---jim:unibrow:

O.K, Thanks. I still need the piece so let me know :thumbsup:

Ok today I cut my roof corner out. Took quite a while to find all the spot welds. It fits back on the car nice so I don't think it was tweaked much. It has one spot that has been repaired but it doesn't look bad in the areas you need. On the corner of the windshield area there is a weld bead that could maybe use a little attention with die grinder but the windshield trim will cover. There is some rust in the front windshield area as you can see in the second picture. Some of those holes are from staples that held the vinyl top in place.

http://i474.photobucket.com/albums/r...m/_MG_5320.jpg

http://i474.photobucket.com/albums/r...m/_MG_5323.jpg

I still could use this. :)

Hey, Sorry to dissapear on you but I had to go out of town on on short notice and I didn't have internet access. Here is a pic of the back side.

http://i474.photobucket.com/albums/r...m/_MG_5329.jpg

Thanks again to everyone who replied to this. Fluxion is sending me the piece pictured above. This will be a huge help in getting my Firebird put back together.
:lateral: :cheers: :woot: