any ideas on a custom grille for my 68 camaro
 

guys first off sorry for all the questions.im learning as i go:yes:
could you guys share some ideas with me for a different look for my 68 grille.
ive seen a few that looked really neat but im wondering what else i could do.
once again thank you

dont... you will be hard pressed to come up with somthing that doesnt look lame, or dated.. grilles very easily look very "billet" in an 80'ies uncool way

of you want to change the front look into marques front valance or simmilar...

We've been working with Zoops on easy to install, clean, tasteful billet grille solutions. Rather than the usual blingy billet grille mojo, these grilles just modernize the look of the car. We just lowered price too! And for a zero-bling option, they will be available full black powdercoat. 68 Camaros will be available for shipment on or about Monday March 23rd. We're doing an install on Vin'z car this week.
I will update my site with new lower prices, product pix and an install article this week. I'll upload some fresh pix to this thread later today or tomorrow.

Some down and dirty uploads--final pix will be of Vinnie's car.
Before
http://homepage.mac.com/streetfytr/....lled%20pic.JPG

After
http://homepage.mac.com/streetfytr/....lafterpic2.JPG

Installation Method (tabs and hardware included):
http://homepage.mac.com/streetfytr/....s/CIMG1292.JPG

69 Camaro Standard (RS also available):
http://homepage.mac.com/streetfytr/....5002%20002.jpg
70 Chevelle
http://homepage.mac.com/streetfytr/....lle%20pic2.jpg
More pix later

That 68 piece looks great, Steve. Wish I had known sooner.... :willy:

Hey Steve any pics of a 69 RS grill? I need to replace mine been looking at options. Any idea on cost? Do they install over an existing grill or replacement what is there?

Thanks!

steve... i retract my previous statement... that looks damn nice imho!

We have found a source for billet grills for muscle cars. they look very nice considering others I have seen and comprable in looks to Zoops. I am just waiting for them to show up before I make the official annoucement and post pics.

I'm with you. I had the same initial impression. Vin even got a grille from one of the big Camaro parts suppliers that looked good in their catalog but reminded me of this in person:
http://www.freewebs.com/rontylees/Gavs%20Van.jpg

The Zoops grilles look right at home and the mounting provisions are well thought out.

That grille is at the powdercoaters. I'll take pix as soon as I can. They install over the existing grille or can replace the existing piece using only simple hardware store supplies--or you can trim some of the existing grille away. The 69 RS is one of my favorite installs. Works nice with the painted factory surround and chrome trim. Price for all grilles is $199.95
Thanks
/Steve

Thanks. Wait 'til you see the pix on Vin's car. I wish we had this grille in place for his magazine shoot.

Looking forward too. Mmmm - black anodized.

Same here, black 69 RS grill :unibrow:

I like what they've done with the grill on the camaro of the latest summit racing catalog. I've seen this done on another car. Is somebody doing this as an off the shelf part now?

http://www.summitracing.com/media/fc...arapr09_80.jpg

Sorry about the terrible photo, i'll try and find the link to the feature car story.

funny you mention that...
steveo did you see that yet? its got your shrifter on it and its mentioned by name there too, i think twice!

Yup. That's Bob Bertelson's car. Good guy! The grille insert is a one off piece.

https://lateral-g.net/members/bertelsen/

http://www.summitracing.com/eventima..._bbma09_01.jpg

I remember seeing another car from a bunch of SEMA pics a couple of years ago had the same thing. (maybe it was this car)

I like the way they have done this, looks like an OEM part.

I was wondering how they have made it, probably from an original lower extension peice with a bit of cutting and shutting done.

Looks trick anyway, I hope someone makes these aftermarket one day.

Billet grille install is done. Took about 15 minutes and required only a Phillips screwdriver. I took lots of photos at various depths to prove that the results are subtle. I had a few pre-conceived notions before physically seeing the parts and performing the install. I thought that the grille would look gaudy. ....And I thought that I would want to trim out the stock grille. I was wrong on both counts. Post install, I can confirm that the grille looks right at home. It doesn't stand out too much and it blends in nicely with the stock grille surround. As for trimming away the stock grille, don't bother. It's invisible. Might as well keep it there to maintain full structural integrity.

Here are the pix (they're big 'cause I wanted you to really see the results):
BEFORE:
http://homepage.mac.com/streetfytr/....e/IMG_3742.jpg
AFTER:
http://homepage.mac.com/streetfytr/....e/IMG_3741.jpg
MOUNTING BOSSES:
http://homepage.mac.com/streetfytr/....e/IMG_3744.jpg
HARDWARE:
http://homepage.mac.com/streetfytr/....e/IMG_3746.jpg
CLOSE-UP:
http://homepage.mac.com/streetfytr/....e/IMG_3767.jpg
ENTIRE GRILLE:
http://homepage.mac.com/streetfytr/....e/IMG_3761.jpg

Well, I like the idea that the stock grill disappears since I have to replace mine and I wouldn't need to paint it, true? Don't know why they come in gray - black would be better.

Anyway, are these available now , Steve? In black?

Looks great, makes me all the more want to see the RS version :yes:

That looks really nice! :thumbsup:

I saw the grill in person the other day and pics do not do it justice. Very nice add on.

Hey Steve any pics of the RS version? Really excited in seeing that one. :thumbsup:


Thanks

Sorry no. I'll tackle that project next week.

Our grills are suppose to arrive Monday, look for an annoucement next week

Oh snap, next big thing for our cars, billet grills. I would be interested in a 67 RS version but I think the whole grill done would be too much. That 68 has a smaller grill so it can pull it off. :yes:

So, am I reading correctly... This just sits over the top of the existing grille? No cutting required?

If so, thats a bloody neat job!

I think I'll take one :thumbsup:

Mitch