69 Camaro Dash board
 

I have 69 ss rs Camaro,

http://www.image-hosting.us/easy/store/69SS2.jpg

http://www.image-hosting.us/easy/store/69SS5.jpg

soon I will restore it but past owner was install a 67 Dash board

http://www.image-hosting.us/easy/store/69SS9.jpg

Can any body help me to find 69 Camaro dash board (Stock, Custom, Modified)

Or can I have any advice.

Wow...that is Odd for someone to do that! I am probably not the best person to answer your ? but I would say you are going to need a donor car for the dash depending how much of what you have it is from the original 69 and how much was cut away. You can cut a dash out from a donor and then get some of the repro pieces, but I don't think you can do the entire thing with aftermarket panels.


Tim

Maybe CAMAROBOY still has the one he cut out of his car ???

call Rick's 1st Generation or www.firstgen.com. Also, what's up with the reverse lights? RS reverse lights were seperate from the taillights and below the rear bumper. Your tailpanel looked smooth down there.

I think the 67-8 dashes look better than the 69 anyway. I'd leave it or fabricate a custom dash.

Thank you BC69, This idea is good but I looking for new style now.

How is CAMAROBOY is it member here?

Thanks for the web site, for the reverse lights the past owner remove it and fix the place to be smooth and put other tail lights (standard or Z28).

you can see the reverse light place in this picture

http://www.image-hosting.us/easy/sto...lightplace.jpg

Now I already have the RS back lights and reversing lights from Classic Industries.

tank you 69rs for replying maybe I well make it custom aluminum dash same race dashes.

When I searching for dash board I found this one in Glasstek Fiberglass, INC www.glasstek.com

Camaro dash 55" wide

http://www.glasstek.com/Gallery/69camarodash3.jpg

This dash only need little cut for gauges, I see this is best choice for me and it cost $260.00.

If there any comments please reply.

Thanks alot, Its realy cool.

I posted that thinking you should contact him to see if he still has the original dash he cut out. Maybe he'll offer it complete for a pretty reasonable price??? :)