17" KINESIS K27 wheels 5x120.65 carmaro vette
 

http://img.photobucket.com/albums/v3...e/IMG_3762.jpg

Kinesis Motorsport 17" wheel set in VERY good condition. These wheels were origionally ordered for a Camaro in 17x9 et52 all around. I had the rears widened to be 17x10" et38, so they are currently 17x9 et52 fronts and 17x10 et38 rears but can be changed to be wider or nattower, fronts and/or rears.

These wheels have only been used for a few thousand miles. The centers have the origional anodized grey Kinesis finish. The outer lips are polished. Everything looks brand new.

I am willing to change the fitment / widths of these wheels for an additional $150 per wheel. Basically, say you want the rears back to 17x9 et52, I can do that by adding 1.5" outer lips to the rears to make them narrower, for $150 per wheel.

Email me for inquiries and/or more pictures. I have detailed pictures of each wheel.

[email protected]

$1790 + shipping via fedex ground anywhere in the continental US for $119, or local pickup in Seattle.

sorry for my ignorance but what is backspace? i see the et but not sure about it.

Backspacing
 

Hopefully this will explain it

http://www.earlywheel.com/graphics/choosingdiagram.jpg

very high offsets(new vettes and 4the gen offsets)
fronts are a hair over 7"
and rears are 7"
https://lateral-g.net/forums/show...ighlight=chart
killer looking wheels though and a pretty good price too.

Ah, Thatcher.. youve found your way on here.

good luck on the sales!

Amir aka.
Dark Demon 8V

Hey Amir! Yup I found my way on here :)

Do you know the weight of these wheels? Thanks

k27's weigh in at around 19 lbs.

What year Camaro. Will those rears fit a 69 without minitubbing? Very interested.

I have no idea, i'm not a Camaro guy in the least bit. Amir, do you know the answer to this?

no they are too aggressive..

for a stock 69 your best bet is a 5 inch rear and an 4.5 in front..

7 inches of backspacing is too high..

I have 18x10 with a 6" backspace on the rear of my 69 Firebird and it is a tight fit.

I think you could only use those 9" fronts with an aftermarket subframe.

Don

Thanks Amir and Don for your input.
Keep in mind, I can change the 10" rears back to 9's if necessary, but doing narrower outer lips or narrower inner barrels. Not sure if that would make a difference on helping with fitment on that guy's car or not.

still available

you should try ls1tech.com

those wheels will fit 4th gen camaros and firebirds good and wont need any adapters like the earlier ones will need.

Thank you for the tip. I just registered for LS1Tech and tried to post them up for sale but it says I have insufficient privilages. :(

o yeah i forgot they have a 60 post min. to make posts in the for sale section.

I got ya!
http://www.ls1tech.com/forums/lsx-pa...l#post12401964

Can you change the backspacing??

hey thanks, i really appreciate that!
Yes - the backspacing can be lowered by adding a spacer or adding a wider outer lip, or it can be raised by adding a wider inner barrel or adding a narrower outer lip.

Damn... I wish I had the money for these. They'd be perfect for the '00 Z28 I just got. Best of luck with the sale.

Thanks!
Still for sale :)