4 post lift options
 

I'm posting this question for a friend - what is a good 4 post lift option? I know there are quite a few different brands, but are there any that stand out with extra features/options?

If you have a 4 post, what kind is it?

Thanks. :cheers:

Four posts are alignment racks. I wouldn't buy one for a home shop.

Storage....

Even for storage....

Thanks.

Anyone else?

I like the idea of having casters for it. Do they all have this option?

Here you go Scott, My buddy Paul has this product for his storage capacity.
He has no options that Im aware of. However he did have to relocate his overhead garage opener to a side mount.
http://www.bendpak.com/

BendPak Incorporated
www.bendpak.com/ -

I have two, both have casters. First one I bought years ago was over 4K, Backyard Buddy brand and is very well made. Second one is a Direct-Lift and was about 1800.00 delivered. It is made in China but works fine. Noticeably cheaper construction but for storage or light use it is great

http://cgi.ebay.com/ebaymotors/Four-...item5ad6242887

and when you add this you can do all kinds of stuff..

http://cgi.ebay.com/ebaymotors/Four-...motiveQ5fTools

If your looking for something a little less cost, this one is a popular choice on garage journal http://www.dannmar.com/dannmar-products.html

Main thing is to make sure he has the spread width figured right. My buddy screwed up; He has like I do, separate garage doors for each bay, the problem is that the bays are very close to each other (about 2' between each overhead door) In the garage interior the posts sit very close to the plane parallel of the next overhead door making it challenging for his wife to park a car if she does not drive straight in exactly. Since Im writing of his problem your probably know what she has done in the past.

Chamberlain Liftmaster makes a great side mount lift eliminating the center overhead track.

Not trying to be a smart ass here. I've worked on both extensively. 4 posts just get in the way. If it's storage only then I understand, otherwise it's not that much work to lift it from the frame and let the suspension hang. You walk through any auto shop and you will see 1, maybe 2.

Greg Smith
 

In the fall I bought a Pro Park 8 Plus mainly for storage use.

http://www.gregsmithequipment.com/Di...ppro-park8.htm

1.They have a great site with lots of info.
2. When I called they answered all my questions without being "you don't want to buy anything else, it'll kill you".
3. It arrived 2 days after the order.
4. It was packed well with no dammage/missing pieces.
5. Easy to assemble and set up
6. When I called with post sales questions they were helpful.
7. Great price and resonable freight costs.

I'm 6'2 and with the unit lifted all the way up I don't need to duck when I walk underneath it. But I also can't touch the floor pan so if I were working on the car I'd have to lower it.

--JMarsa

We have one of these in our shop used mainly for storage and street rods which are difficult to rack on our two posts. It is an ALI certified rack and we've been very happy with quality vs cost. A four post is also very useful when suspension needs to be loaded and exhaust work (rearend clearance).

I also like the fact that it's warehoused by the people selling it. The parent company is the Dover elevator co and it's engineered by them :) but built to their specs overseas :( .

--JMarsa

4 posts work great especially with the sliding jack I had posted the link to. When I want to steam clean under a car I roll the whole thing outside and have at it. When you are working under the car the rails it sits on also make great place to put all the nuts, bolts,parts etc as you are removing them. There is also less chance for error as opposed to a two post. In this forum we are mostly home users and alot of home users are novices when it comes to working on cars and you really need to pay attention when picking the lift points of a car when using a two post. A four post you are driving onto the rails and the main thing to watch for is the locking safety tabs on each corner. I see a two post in my future but I have plenty of room. If I only had room for one I would get a 4 post with casters.

Look at shipping weight. The better lifts tend to have more steel in them. Stay away from the "light" ones.

unless it just for storage or doing alignments, I wouldn't recommend a 4 post either. I've used a ton of different lifts over the years and I highly recommend getting a professional grade lift vs. some backyard type. Make sure the lift is ALI or ETL approved.

I got my Bend Pak 10,000 lb clear floor wide lift from this place a few years ago : http://www.e-autolifts.com/

good people to work with and there were no hassles at all.

I have a Direct Lift as well. It was cheep enough for someone like me to purchase, and I use it all the time. with no problems. I have had for 5+ years, and it great! I like it and would purchase another one if I had the room.

Scott,
Make sure you check with Kurt, I know he has one in his house garage.
Travis

I had a 4 post --- for about a week.... THEY SUCK! Storage only. If you want to work on your car - get an Asymmetric frame lift. It can store your car just as well... and you can actually work on something if you want to.

No "opinion" here <----------- :lol:

Finally the voice of reason.:D

SW has a few and that guy has nothing but really nice stuff. I'd ask him.

:captain:

Backyard Buddy w/Casters here. Having used both, I greatly prefer the stability of the 4-post over the two-post...I have really never had any problem doing anything that I wanted to do, on the four-post.

I wish you'd get out there and start using it -- so you can get that project on the road!!

:unibrow:

Me too...Gotta finish up the new garage/shop first.

I have a few 4 posts.( http://www.kennan.ab.ca/lifts.html ) Local dealer.

Mostly for storage, they work great. The casters supplied are shat and don't roll with it loaded. Besides that no complaints.

For working on the car I think I like the two post a little better. Being able to move the lift was a big priority for me so the four post became a obvious choice. Have yet to run into a situation working on a car that I thought they sucked?

They sure beat a creaper.:rofl: Let's say you are swapping lower control arms or a complete rear end. The jacks like Charley pictured really get in the way for anthing but an alignment. For a novice that does very little large projects, then I agree that the 4 post is probably best.

and I was upgrading from a creeper. I kind of agree with Todd so I'm lucky to have two post access when ever I need it.

Four posts are for beds....

:rofl:

I have a Backyard Buddy 4 post which works great. Now, in a perfect world I would have 3 different types of lifts in my shop but since I have only one in my garage, I went with a 4 post. I believe 2 and 4 posts both have their advantages and disadvantages, depending on what project your'e working on. The lift I have is a 110 volt which is nice since it can be plugged in anywhere and I didn't need to run a 220 circuit to feed it. Also I did not need to secure it to the concrete floor so if ever I move or need to change the configuration of my work space I can move the lift fairly easily. Whatever lift you do decide on should at least be of a " better quality" since your life could truly depend on it.

my .02

In my experience:

4-post = storage, alignments, maybe oil changes and such.
2-post = work lift.

There are exceptions to both, but that is my general experience.

So if your pal is buying for mainly for storage go 4 post. I'd not store a car by hanging it in midair.

The funny part about this entire thread -- the OP asked specifically for STORAGE....

LOL

But it has been fun lobbing a grenade in here once in awhile... and reading what everyone feels is the best kind of lift.

I don't understand. I just took these pics. I'm going to be playing with the sway bar. I don't see where I couldn't swap out control arms or do any other front end work. The rear can also be lifted.

That's way too high for me to work under....

Take that front wheel off and duck under that lift 100 times a week to work on the inside of the hoist and then the outside. I was auto tech with GM from the age of 19-22ish. I've worked on 1000's of cars on hoists. Boy I don't miss those days! :unibrow:

But nobody on this site is going to be ducking under a lift 100 times a week. You can do just about anything with a 4 post that you can do with a 2 post plus you can do exhaust work with the suspension compressed etc. The negative to a 4 post is if you have something like a late model Camaro you can't drop the subframe. You need a 2 post to do that. I worked in a shop for about 6 years that had in ground lifts that had that had the arms you swung around and they were a pain. All this stuff is better now. The sliding jack that I just lifted the front of Jackass with took 4 posts to another level. I can pop a balljoint and work on the suspension at any height I want. With a 2 post I would be down at ground level with the jack on the floor to support the lower control arm. I can see if you are something like a brake shop where you are pulling wheels off every time the car is lifted that a two post would be faster but for the average guy on this site I still think a 4 post is the better way to go and safer.

One day I will have a 4 post in my garage. I like the fact that it can be moved around if need be. I also will be using it for storing my car. For me a 4 post makes total since.

You like red heads, I like brunettes. I always used a set of these. http://www.harborfreight.com/cpi/cta...emnumber=41860 That way you can simulate suspension at load, hold exhaust in place, support the front or rear of the vehicle if you removed the engine or frame. I'll bet you a beer that next time I see you, you will have been in a scenario where you cussed your lift for being in the way or conking your head on it and wished you had a 2 post. Bet? :D

Charley, my issues with 4 posts with suspension work, etc., is that the lift gets in the way too much. It can be done, not as easily. I'd say the 80/20 rule covers this well. I'd guess 80% of the the work we do is easier on a 2 post.

the ones with pedal to push stuff up..like the back of a trans...are nice.