Frame off 69 Build
 

Finally starting my 69 Camaro build I picked up back in December.. It's a roller that needs alot of work, but the price was right! So far plans are:

TCI front & rear subframes with 3 link, modified to fit 335 rear tires.

427 TT LSX with built T56

Fabbed 9" housing with aluminum center section

Brembo 6 piston or C6 ZO6 brakes

multi-piece wheels

Shave all emblems/mouldings, maybe flush fit glass..

The list could be endless but that's the gist of it.. Picking up the shell from the blaster tomorrow, pics should follow shortly!

I know you said pics shortly, but I figure I'll say it first since you didn't give us any before pics.......:ttiwop:

agreeded pics ASAP!!!!:thumbsup:

What these guys said! ^^^^ :cheers:

And what he said too......^^^^^:D

I'm in for some pictures too!

I've been putting alot of time into the 69, DSE tubs are almost in! Pics will be here soon!

After alot of work, & too much slacking on pics, here are a few..

It looks great ,Nice work.

Looks good the firewall came out really nice looks really flat is aftermarket or did you smooth it?

Thanks! I went right over the top of the original firewall with 18 ga sheetmetal. Alot faster & easier than welding up a bunch of holes & tons of filler. There is no body filler on the firewall @ this point.

Tci W/335's
 

How did you modify the rear Tci 3 link to fit the 335's ? Any pictures of this ?

haven't got to that point yet, I've installed a couple on non-mini tubbed cars, from what I can tell the shock crossmember has to be modified & the brackets that mount to the outside of the frame rail have to be removed

TCI W/335's
 

Thanks. Please post updates/photos when you get to that point. Good luck.