Lets see your DSE dash set ups
 

I am looking for some lay out ideas for my DSE dash (69 Camaro) so please post up some pics of what you did.

Here are a few I have found to start it off...

http://i855.photobucket.com/albums/a.../Img1408-1.jpg

http://i855.photobucket.com/albums/a...ate2610001.jpg

http://i855.photobucket.com/albums/a...aro0909010.jpg

http://i855.photobucket.com/albums/a...1/Picture5.jpg

http://i855.photobucket.com/albums/a...042_detail.jpg

does anyone have pictures of the sports comp II and the ultra lite II lit up?

-dan

http://i34.photobucket.com/albums/d1...Picture035.jpg
http://i34.photobucket.com/albums/d1...feb1906022.jpg
http://i34.photobucket.com/albums/d1...Picture081.jpg

Here is Scott's interior with ultra lite II

https://lateral-g.net/g69/project/interior/

I just posted my new setup a couple weeks ago.
Here they are again.

perfect!

thanks! Now I need to decide on the covan cluster or just try to make them fit in the original cluster.

Back to topic. didn't me to hijack the thread.

Great, thanks... Anyone running the AM Carbon Fiber gauges?

Heres one that came with my project car i bought off the forum..
http://www.fquick.com/images/vehicle...7487238586.jpg

I had added a shift light but never updated my webpage... It's pretty cool, it ties into the tach and can record and playback.


http://lateral-g.org/temp/shiftlight_day2.jpg

http://lateral-g.org/temp/shiftlight_nite.jpg

Yep:

http://www.69camaroproject.com/Share...ompleted-3.jpg

Sorry for the shameless plug, but how anout something a bit different?
Mark
http://inlinethumb39.webshots.com/29...600x600Q85.jpg
http://inlinethumb43.webshots.com/31...600x600Q85.jpg
http://inlinethumb35.webshots.com/43...600x600Q85.jpg
http://inlinethumb38.webshots.com/12...600x600Q85.jpg
http://inlinethumb29.webshots.com/21...600x600Q85.jpg
http://inlinethumb31.webshots.com/43...600x600Q85.jpg

Wow. Lots of cool ideas. :thumbsup:

Simply a thing of beauty!!!!!!!!!!!!!!!!! :thumbsup:

posted in the wrong thread... whoops

Man,Scott you sure do take a good photo.You should see if Hugh Heffner could use you service's.:lol: Scott M.

Can anyone tell me if 2 5" gauges and 4 2 5/8" gauges along with the heater controls and AC vent on left side will fit in DSEs dash panel?
Thanks in advance
Steve

Mike what size gauges are those??

Little better photo of mine. This was before I put in the oil temp gauge between the tach and speedo. The sport comp II's are a really nice gauge and have illumination on the level of any factory gauge I've ever seen.
http://i200.photobucket.com/albums/a...k1969/LG11.jpg
http://i200.photobucket.com/albums/a...ack1969/26.jpg

Todd,

Your set up is very clean and functional. :thumbsup:

wish I had a night pic

Can someone send me a photo of the AM Carbon Fiber gauges at night turned on? Anyone have a photo they could send me please...

[email protected]

Holy cow. Forgot I started this thread, almost 2 years ago.

Pretty timely though since I just finished mine this past weekend.

Sorry I don't have night shots yet. The dash is going in this week. I'll get some picks up when we finish the wiring in a couple weeks.

I still need to drill the hole for the lights and wiper switches.

http://i855.photobucket.com/albums/a...-54-17_515.jpg

[IMG]http://i1080.photobucket.com/albums/...psb69739dd.jpg[/IMG]

[IMG]http://i1080.photobucket.com/albums/...psf40e2da4.jpg[/IMG]

Excellent, thanks..

SWEET!

Well on the way getting the DSE dash started. Got it all cleaned up and sprayed with Etching Primer and ready for a new coat of sanding primer. Ordered a set of AM Sport Comp II gauges and VA dash vent through Matt at MCB, Have the Gen IV Controller going in as well with RideTech Knobs..........

Cant wait for the little brown truck to show up soon! :popcorn2:

Love the Brown Truck & Fed Ex drop off's...:lol:

AM SPort Comp II Gauges & VA dash vent ordered from Matt at MCB
VA GenIV control module is back from VA after a slight issue
Dash turn signal/high beam lights from DSE
Waiting on dash switch with RideTech knob from Richio1


Now it's time to get the dash layed out to get holes done...Woohoo!!!

Looking good. Love those delivery days. I picked up the knob today so they will be going out in the mail tomorrow. :thankyou:

Thanks Jeff.......

Well it's time to do the fun stuff.......Measure 5 times right..:thumbsup:

I wish you guy's would post what size gauges you are using.

They all look great though and I hope to get mine started soon.

John

I am using 5" for Tach & RPM, and 2 1/16 for the others....I will have it all cut out tomorrow night.

IF you go with 5", it doesnt leave much room on the left side of the dash for 2 gauges and an a/c vent as the dash is not symetric. I bought one a/c vent and ended up changing it out to get more room for spacing the gauges around. We will see what the final look is tomorrow and I wll post pictures of it..

Another step closer and very happy with how it is working out, still got to paint it yet (Matte Black)....Thanks to all those who contributed to the project and or I bought from :thumbsup:

Looking Good :thumbsup:

Paradise Road Rod and Custom just finished mine. 5" UL II tach and speedo with 2 1/16" others. Really happy with the look.

Woohoo...Just got dash back from paint this afternoon...more progress and ready to get started on hooking it up.

Woohoo...dash all back together, now on to the next project:excited:

Could some please measure how much metal I'd be working with where you guys are mounting the tach and speedo..

I'm thinking of using a tablet for all my gauges and wonder what size I can go with.

Width I know I'm fine, its just the height part..