Cheap Reproduction Panels
 

There are some relatively cheap reproduction panels out there (example linked below). Just curious if anyone has any experience and how bad the fit typically is with panels like this?

http://cgi.ebay.com/ebaymotors/1968-...Q5fAccessories

Don't expect any of them to fit perfectly. Fenders seem to have more fitment problems than quarters, but you won't know until you get them in. Just expect to wrestle with them a little before they start fitting better than out of the box.

I dunno if these are what you consider cheaper sheet metal front fenders, but they are made by golden legion.

The fenders out of the box, some stamping score marks on the passenger fender along the hood bend. But other than that, no dents/dimples. It took 4 big shims up top and 3 below and one on the firewall and a little one in the door jamb for us to get it lined up with the door/rocker.

The driver side had no dents or scoring marks but 11 dimples that I will need to ping out. The fender fit tighter than the passenger but ended up requiring basicly the same shims as the passenger side did to get the body lines correct.

/shrug

The header and lower valance (pre modifications) are AMD, much nice stamped parts and a bit thicker it seems.

All in all the sheet metal is fine in my opninon, you have to skim/work old ones or NOS also so no big deal imo.

Cheap Reproduction Panels
 

What about door skins - are they all the same for 69 camaro i.e AMD versus dynacorn, is there any difference in metal thickness or much for muchness?

If you can get AMD get it imo. There are a few threads around about their sheet metal. It seems to be a nicer stamping, only reason my fenders are not AMD is I have had them out in the shed for a while already.

You get what you paid for, if you want the best on the market, it's AMD.

I can hook you up with the best price on Auto Metal Direct .I'm autorized distributor.Just shoot me PM

I was told the guy that used to own Goodmark started AMD is this true?

Interesting comment. I also 'think' AMD is the best aftermarket product. I've not compared different brands, but I have seen some really bad stampings, thin/wavy metal, etc. I recently needed most of my front clip replaced and have looked at this issue hard...

Most "aftermarket" panels are just re-boxed & manufactured by the same companies. I just fit new fenders, doors, quarters, etc from OER on a 69 project & everything fit good with some massaging. I've also used dynacorn & other aftermarket vendors & experienced the same thing. Haven't found a panel that fits perfect out of the box, better than trying to save an old rusty, mangled original IMO..

We have been selling the AMD stuff since we got our first piece 6 months ago. I am completely sold! And yes it is one of the original Goodmark guys that started AMD to offer a better product.

We used everything they offer on our Project Unfair including their awesome aluminum front clip, bumpers, deck lid. The quarters are almost 50% heavier (thicker) then the other aftermarket panels, we are weighing the weight difference as part of our story.

We will be getting a prototype set of doors for Unfair that will be thicker and better fit. The repro door that is out there now will dent if you close the door! Can't wait for the doors! Been a big problem for us.

They do not make everything yet and we were forced to us some stuff they do not make yet. But they are R and D ing stuff everyday, and to do it these guys are taking apart perfect original bodies and having them reverse engineered.

If anyone needs any AMD stuff, hit me up. We have some really good shipping deals right now.

AMD does not re-box & sell Goodmark or Dynacorn parts, they have their own tooling and if you actually have ever had AMD part in one hand and Goodmark in the other ,you'd know which one is AMD simply by the weight, their full OEM style quarters can weigh over 70lbs .The metal is alot thicker, I just got a set of AMD inner wheelhouses for 69 Dart at the shop to do the mini-tubs and they must be 16ga,no joke.Very thick and heavy. Can you say that for Goodmark or any other aftermarket brand?

Thanks Frank just wanting to make sure.:thumbsup:

Dewayne