1970 Camaro Project F/s
 

1970 CMARO NEW QUATERS,DOOR SKIN,ROOF SKIN ,TRUNK PANEL, REAR PANEL, AND PASSENGER FENDER,DSE MINI TUBS,-I HAVE MOST OF THE INTER. XTERIOR AND GLASS BUT THEY WILL NEED SOME WORK

-ALL NEW ORDERD IN 2009 FORM SDPC L76 500HP/500TQ W/S&P HEADERS,SMALL BLOCK MOUNTS,

-TTII 18" WITH NITTO 555

-WILWOOD BREAKS FRONT AND BACK POLISHED 4 PISTON 12.2" ROTORS WILWOOD POLISHED MASTER AND POWER BOOSTER

- I HAVE EXTRA QATER PANEL,DOOR SKIN,OUTER WHEEL HOUSING AND 2 TRUNK FILLER PANELS THAT WILL GO WITH THE CAR.
-12,000

CAR COMES WITH A 10 BOLT BUT I DO HAVE A NARROWED 9" THAT CAN BE SWAPED OUT.

ALSO HAVE A SET OF HEDITS UPPER AND LOWER CONTROL ARMS THAT CAN BE SOLD WITH CAR.

EMAIL ME I CAN SEND MORE PIC'S [email protected] I HAVE ENOUGHT PARTS LAYING AROUND TO SELL THIS AS A GOOD START TO A PRO-TOURING, PRO-STREET ARE GOOD CRUSER.

:willy:
How much?

ditto and location :yes:

asking $12,000 for it with the parts listed above.I also have 2 exrta GM doors and 1 GM fender that will go with it. but they do need some work.
I am loacted between baton rouge and new orleans.

did you sell the Forgelines or are they for sale?

The forglines are not listed for sale here but i will sell them they are ZX3S 18X12 6" B.S. 18x8 4 3/4" B.S RAPED IN BFG KDW2 335-30-18 AND 245-40-18 I would have to get close to $4,000 they are new only used for mock up.

I am willing to part anything out.

this a link to the motor
http://www.pro-touring.com/forum/showthread.php?t=47065

whats the specs on the tt2 18" and the nitto 555? will you sell just the rims and tires? pics?

left a post on the power touring forum about the ford 9 inch rear end. info and price please.
thanks tom

I Think they are 18x9 OR 8 1/2" REAR 255-45-18
18x8 FRONT 235-40-18 I AM NOT SURE OF THE B.S. ILL MEASURE IT SUNDAY WHEN I GET BACK IN TOWN
1600 PLUS SHIPPING. They are cuurently on a 1971 camaro and the fittment is perfect.

very interested in the wheels. pm sent

ok its a roller again everthing you see in the pic's are for sale ask 12,000 obo you get the car all the new sheet metal both housing's 10 bolt and 9", both sets of wheels and tires,extra willwood brake kit 10.75 , the LS 6.0lt l76, S&P headers, HEDITS upper and lower control arms, stock control arms with new ball joints and bushings and everthing in the original post. any resonable offer will be considered



contact me with questions

[email protected]