Aluminum Guage Bezels
 

I am looking for some bezels that go over the existing Autometer guages. They are for 3-3/8" and 2-1/16" guages. I saw some from www.twistmachines.com. Is there any other ones out there.

http://twistmachine.com/shopping/ind...products_id=30

What kind of look are you going for? Our machinist does these types of things pretty inexpensively, as long as the profile is pretty simple.
Mark

gauge help
 

Hey I have 2 autometer gauges n I am trying to figure out how to get them to mount to a center console at a angle facing me. If that makes any sense

here ya go!
http://www.autometer.com/cat_mounts.aspx?sid=54

Im in the market. If you can have some made similiar to those I would be very interested especially they are cheapier.

2x 5"
4x 2 1/16"

Not looking for ones that have holes just a nice smooth accent...Pm me if you like I am ready to buy..

Thanks

Chuck D

If these are one-offs, probably wont be cheaper, but we can spin some up on a lathe, and finsih up however you want

mark

Look here: http://shopping.rexmar.com/Merchant2...de=gaugebezels

How do those work? Looks like you would have to remove the plastic bezel or something.

They go behind the gauge.

Oh, ok. So you still see the bezel on the actual gauge. I used the twist ones but am always keeping my eyes open. Thanks.

How much wider do the twist ones make the gauge? I am making a gauge cluster along the lines of the one in Chicayne but the bezels are ral close so I dont know If I can use the twist ones in it.

http://i888.photobucket.com/albums/a...sc/68/dash.jpg

I did some filing to the twist machine bezels to make them fit my gauges.

Here's a twist on the "Twist"
 

Custom gauge pod with Autometer, Twist and The Shop LLC
http://www.hubgarage.com/mygarage

What is the dash made of? What applications are you offering and are here any photos of it installed in cars?

Pods/gauges Interior
 

It is being made of fiberglass, carbon/kevlar, and even plastic....Here is a picture of the dash in a 70 Chevelle....Click on this link for more of our work....Thanks....The Shop LLC
http://www.hubgarage.com/mygarage