70-81 camaro Street Fighter Sub Frame
 

Well here is our New Street Fighter sub Frame Kit. the kit includes EVERYTHING but the actual sub frame. The Second Gens sub had good geometry and we took advantage of that. We designed it arround the AFX Spindle, which has been a long time comming.
the system has improved the geometry in both the camber gain as well as bump steer. the Lee 12.7 (OR 14) : 1 box and all new linkage are included. Qa1 shocks are standard with Ridetech available as an upgrade.

http://i1235.photobucket.com/albums/...eetfighter.jpg

http://i1235.photobucket.com/albums/...etfighter4.jpg

here is a link to our site with all the details and pricing.

http://www.speedtechperformance.com/...rod/prd284.htm

Looks good is the upper coilover mount bolted in or welded in ?

Weld in

I know a guy coming out with a kit to do the coil-overs the same way, I wanted to drive his car and see how it felt before I bought it. Any chance of coming out with that upper piece and a template as a separate piece? I Have uppers, but I want your lowers with AFCO's.

Is that a Lee box it comes with?

The upper Chicane kit is available seperately.
yes it is a Lee Box

I know you have a aftermarket 1st gen sub. but you should also put together a package like this for for the 1st gen.

Travis

We pretty much do have a full package.One Laprns it. just never put it togethere as an official kit, We have so many different options fo rthe first gen best to call and discuss your needs and budget and we can put together the best kit that will work for your needs.

its about time blake. looks good

any feedback on this kit?

there are a a few out there in the build stage right now.

what width tire and wheel can you run with it?

Currently the biggest practical is a 9.5 wide with a 275/285, we are currently looking to redesign the sway bar (with hellwig) to fit a 10 and 295, it will physically fit right now just looking for a bit more turning

sounds good you have a fire sell on these things anytime soon????? looks like a nice product and what i intend to do with the car.:thumbsup:

No Fires here???

lol
:thumbsup:

thanks blake ill be in touch.

Are you going to come out with a torque arm rear setup to go with this? I remember talk of this at one time but can't find it on your website.

Also, what headers are you using with LS motors and your Streetfighter front suspension?

Don

We are starting the Torque Arm Suspension at the end of the month for the second gen cars, i have 2 in the shop now that we will be using for test fitting on. A 73 the other is a 81 both will be minitubbed as well. so it should be ready early in 2012. the sooner the better i know we have a bunch presold.
As for the headers for the second gen streetfighter any header that fits the stock sub frame will work, I know there are not alot of choices, we are in the next couple days scheduled to check our existing LS headers to see if they are close to fitting.

Now that Edelbrock is gone the only header option I can find is BRP mounts and headers. I hope you add headers because right now that is what would push me to AME or JRS - they have headers.

Thanks,
Don

Well heres the bad news, the headers we currently have only the driver side will fit, with our mounts. I have a call into Stainlessworks to see if they would be willing to let us design a pass side header to fit, so stay tuned.