Alluminum Polishing
 

What is the best kind of rags to use on alluminum? I got that mirror finish but still have the fine scratches.:willy:

Chrome them, that's the only way around it. :D

Totally agree with that statement!

Aluminum is so dang soft - looking at it scratches it.

You'll find BILLET aluminum shines more and is harder generally so isn't as easy to scratch.

That doesn't answer your question. Mothers makes an aluminum polish that is pretty good... it's just so hard "by hand" -- thus their Power Balls.

OR:D Let me borrow that thing for a weekend and a few microscopic scratches in the right light won't matter a bit. :lol:

micro fiber is the best.

baking soda or baking flour will get rid of the micro scratches i have read.

same as you ise on your paint. what was the finest paper you finish sanded with?

I find microfiber works well for the not quite mirror finishes on some things, but if you really want a true "mirror" billet finish it's not fine enough. I use a two step process on some things. Very lightly use something like a microfiber with a relatively mild polish for the first stage. Then I need to use an even finer and softer white linen cloth with a fine billet polish for the 2nd stage. Even then, I can't get it absolutely perfect sometimes. This is a very frequent thing for me considering the amount of billet and polished aluminum on my car.

Thanks Guys, I guess I'll stick with the micro towel for now, There used to be some kind of turkish towel out there but I can't seem to find any.

That was Turkish Hash DB.... and you smoked it... which is why you can't find anything now. :lol: :lol:

Brush it and clear it and be done:unibrow:

try using a finer polish.... ( you may have done this already...) but I've found that some polishes are inconsistent and can actually cause scratches in softer alloys.... that paste polishes in particular. Microfiber is very very soft... but if it's contaminated it can hold on to debris and cause what you're seeing as well... they're cheap and available so try using a "new" or freshly washed one for your aluminum and billet parts.... then after one use relegate them to different uses that dont matter so much.

JMHO

KT.

On Aluminum I like the Mothers polish and old, 100% cotton under T-shirts, or any old T-shirt that is 100% cotton so long as they do not have any printing on them.

That's ALL good advice right there. There are softer grades of micro-fiber as well and I've used some royal blue ones that are super soft. Liquid polish with a solvent base works really well and there are different grades just like paint polishes so experiment and shop around. You might also try a cordless drill if you aren't getting what you want by hand.

Any kind of cotton or even terry cloth short of a robe stolen from the Ritz-Carlton is way too aggressive for the final shine on aluminum. Fine for getting the process started just like wetsanding with 600 grit before you go to 1000 but never finish with cotton.

After you get them polished, wax them or use a sealer like that from Master Formula to help preserve the shine and then use a wax as you dry type product on your parts after every washing.

If you're just getting sick of the tedious labor, the various shapes of Mother's Powerballs with a higher quality polish is hard to beat in effort vs results.

Chrome is obviously zero maintenance but I think aluminum has a much richer shine because chrome is only as thick as the plating but aluminum is all the way through.

In the end, if you aren't competing for the Ridler, just go out and drive it until you get some scratches and chips so you aren't agonizing over fine scratches left from polishing.

Thanks Jason, trust me I'm driving alot, Got about 1000 miles on it so far. I'm just trying to perfect it for goodguys next weekend. I'm using mothers polish for now. Got a ball as well. See you soon..

So, before the advent of microfiber towels, I guess no aluminum got polished?

Not true! I used to disassemble mine and stick it in the freezer... then licked it.:unibrow:

For most cleanup I use those blue shop towels and Mothers or some other aluminum polish. Microfiber towels work well too but they seem to not hold the compund the way the blue shop towels do thus making the towel more able to polish longer.

I have also found that the finish last a lot longer if it is mirror polished to start with.

I have a lot of aluminum and some of it just gets the scotchbrite treatment for the finish and the cleaning, it is near impossible to keep it looking perfect and if you can't live with it you should paint it!

???

Like I said, I find microfiber is NOT the best solution for that really mirror finish billet. It looks soft, it feels soft, but it's too porous and ends up not being able to eliminate the finest of scratches for the REALLY high and deep gloss mirror finishes. I've got pieces that I would never EVER touch with microfiber. I frankly try not to touch them at all. The blue shop towels to me are also too "fibery", if that's a word. There is still paper in them and it scratches in my experience. The key for me is to use very very mild polish, a very soft white fine polishing cloth, and an extremely light touch. Aluminum is just so soft.

^ I agreee about blue shop towels, they would only ruin polished finisn on my daily driver, I simply use compressed air to get most of the dust off and lightly wipe down with soft microfiber towel.

For anyone that wants maintenance-free durable polished finish,spray Glisten PC made by POR15