Best radiator and fans for LS '69 Camaro
 

I know about the BeCool set up at DSE and the setup that Frank sells at Prodigy, just wondering if there is a cheaper option with good quality to boot.

I have seen the Entropy set up on Ebay for 700.00 with a harness for another 100.00, but I'm nervous about the quality and ability to cool in extreme conditions.

Am I stuck with spending 1k, or does someone have a better option out there.

Thanks,

Matt

You can get into a C&R radiator for half of that, and have a top quality all aluminum US made product.

I'll check them out!

I'm running the rad. and fans out of a 99 Z. I think I have around 225 dollars in the whole thing. 4 yrs. now and no issues. I might some day look at the Afco brand.

Good luck John

I ran the entropy setup for 2 years with no problems. Vintage Air in 100+ degree Texas heat with never a hint of overheating. I wouldn't say it is the best available but it worked well for me.

Don

2nd on C&R, I have also heard lately of a few people using a company called Mark7 with good success, they color anodize to order as well.

I'm getting ready to throw the 3rd radiator in my car and it's likely getting a Ron Davis. With that being said, I wouldn't spend the money unless you are going max effort.

That's great info Don...your the first I've heard use the Entropy and the price is certainly right!

For a Max cooling radiator I think it would be hard to beat Ron Davis in quality and cooling. I have one and the quality is simply stunning:
http://www.rondavisradiators.com/LS1...O-RADIATOR.jpg

They do make one specifically for a LS1 conversion into a 1st Gen:
http://www.rondavisradiators.com/radgallery.htm

I used the Entropy and am getting ready to order another for my new project,another 69 camaro LS3,the quality of the Entropy is super.

Subscribing... Im hoping to maybe swap over to an LS3 sometime next yr.

We've used the PRC units with great success and the price is very reasonable. You can get dual 11 or 12" fans.

You can go with a C&R but you looking at $600 - $700 for just the rad and then you need fans....

I have a friend that uses an Entropy on his LS powered 1st gen Nova. Has had no problems and he drives the snot out of it.

Tim

PRC radiator, 2 12" fans, 500 HP BBC, 108 degrees in Phoenix driving in traffic. Engine temp b/w 190-210

I used a Entropy in my 69 LS1 and it worked GREAT. The plastic cover for the fan was crack and they sent a replacement out ASAP along with a tool to fix it. Great customer service!!

I have run at least 30 Entropy radiators- usually in big block and LS powered cars with AC and in 100 degree Sacramento heat, in daily drivers.
I have had no problems whatsoever. They can accommodate the steam tube for the LS and put the inlet & outlet on the same side. SPAL fans move a lot of CFM.

Great value, solid product and excellent customer service in my book!
Tony has been really helpful.

If you need any pics, pricing or feedback, give us (or Entropy) a holler.

Which of these radiators use the thinnest fans? I want to turbo eventually and will need all the room I can get.

Entropy offers a thin-line SPAL fan combo. Most manufacturers can accommodate such a request, just be sure to calculate plenty of cfm!