Anyone ever used this console?
 

Found this while searching google. Seems decent

http://www.classictruckconsoles.com/...inkholders.php

I found a real nice looking console on eBay. Just search 69 camaro center console

Interesting! I've been searching too. Did you see this one http://www.modernclassicsinteriors.c..._Stiletto.html

Thats not a bad price or a bad looking part. Thats a nice time saver

It would be nice to see some installed pics on a first/second gen camaro!!!

Nice find! I imagine Tracy could dress that up nicely.

These are the only pictures I can find of it. Im really just waiting for someone to post some pictures of it wrapped in leather and installed in a 69 camaro. Hope it looks as good as I think it will.

Ok I did some measuring and the one in the link above is two inches too wide. So I called them up and he's got one for the 69 camaro that measures around 10 inches wide at the widest point. Should fit great. My order is in!
I will see if I can get some pictures off of him.

in for pics.

Those are the ones I saw on eBay

Did you end up getting one?

Those are pretty sweet. Looks expensive for what it is though. Have you considered building one yourself? I'm designing one now for my 67. I plan on using fiberglass and foam over a round bar frame. I will follow up with details.

I would love to see some pic of what other have done with their consoles as well.

I put my order in. Just waiting for it to show up. I will post some pictures of it when it arrives.

I've got a 69 project going too. I'm considering the MCI. Watching this thread!

Here's the e-mail I received the day I ordered. It looked good to me so I went for it. Should see it here soon I think there were only a few orders ahead of mine.

"This console comes as you see it, the front and top of the tower will need to be cut to fit your car.

It is about 30 inches from the back of the arm rest to the face of the tower and it is about 10 inches wide on the face of the tower.

Check your measurements to see if this will work for you. The top of the tower ( after the cut to fit ) should meet the dash just behind the bottom of the ash tray and the back of the arm rest should sit above the seat belt bolts on the tunnel

We will need to know what type of shifter you have before we can install the cup holders ,we have had some automatic set ups that won't allow us to use our cup holders, there isn't enough room for the bezel and the cup holder."

Console
 

So its here and looks good. Once I trimmed it down to fit just under the dash. It ended up being about eight inches short (Does not go back between the seats far enough). Im going to cut it in half just in front of the storage compartment and add the extra length in.
Not a direct bolt in but lots to work with.

Did you inform the seller?

No I didnt contact the seller. The seller never claimed it was a direct fit. Im more than happy with it. Like I said lots to work with and the end result will be nicer than if I had started from scratch.

If you can try, Glass in a metal or aluminum strip on the inside area where you are extending it. Gives it extra strength. Nice looking shape to start with, Should work great.

Sounds good. Thanks for the tip Tracy. I'm going to pick up some aluminum and fiberglass today after work and get at it. :)

Here's a few update pictures. It's going pretty smoth so far. Need another day to get it sanded out and painted. Then its going to get wrapped in black leather.This thing is sturdy and light weight as well.

I like what you're doing with it. I'm contemplating their Gen 2 stiletto on my build and will likely be making changes as well.

I'm not sure if their site said anything about this before, but they now mention that if the measurements aren't accurate to your vehicle they can make changes to fit.

Any updates dubbleu?
Can you show some better pics of where is meets the dash.

Not a lot of progress. Ive been swamped with work but I did find time to finish the area where it meets the dash. I will head out to the shop and snap a few pictures for ya.

Interested as well in the updates..

A little fiberglass and bondo and here it is under the dash and pushed back to where I wanted it. Hope That gives you a better idea of what the finished result will be.

That looks really nice in there. Great job.

Mine arrived last week, very nice quality...let the modifications begin. this is going in a Duster so some Fab work is a must, but thats okay.

Im gonna have to order one. Im going order mine a little longer

That is sweet. Just ordered the Gen 2 Stiletto....I see you have the Marquez door panels as well. I ordered those too. :unibrow: :lateral:

Nice!! :thumbsup:

subscribed, looking forward to seeing your consoles finished.

Any more updates, anyone?

Great job on the console. I can't wait to see more.