What to do with my floors?
 

Guys getting my cars floors blasted this week end and was wondering what r u guys painting them with? The floors will be epoxy primed following the blasting. Should I raptor line them or just paint over the epoxy? Car will be a driver not a show piece. Thanks in advance.
Steve

I wire wheeled them, cleaned them up and POR15.. hushmat over the top, Not saying it's the right way just the way i did it,

Hi Steve, I would epoxy the floors and raptor. Make sure you get yourself one of those cheap paint suits and gloves and plently of tape and a roll of automotive plastic. :thumbsup: Joe

Thanks for the help guys :thumbsup:

Joe how does the finish look like? Dont want it to look like im trying to hide something. Just want it to look neat and tidy but durable at the same time.

Under the car or inside the car? Under the car you can paint or use bed liner. If its in the car I would just leave it epoxy. No point in painting it if nobody is going to see it. Just Dynamat it.

Steve I would recommend the U-pol Raptor too. I did a members car on here (JMitch19) a few weeks back after a mini-tub install. It looks awesome not super thick looking just enough for a little forgiveness and durability.:thumbsup:

Where can i find that U Pol Raptor stuff?

Thanks for the help guyshttp://www.50centloseweight.com

Just about any paint supply store.

Another for the U Pol, you can find it online also. But if you have an automotive paint store close to you they will have it or can order it for you. Remember to finish all that you want to do to the underside of the car before you coat it. Once it's on it is not fun to remove.

Can anyone post pics of their undercarraige with the U pol raptor liner or otner stuff. Please let me know I will be painting it next weekend.
thanks

There's a few pics early in my build thread - pg 8. UPOL's good stuff...

Not on floor pans but you get the point..

this was done with 2 bottles...

http://img.photobucket.com/albums/v3...IMG_0153-1.jpg
http://img.photobucket.com/albums/v3...IMG_0156-1.jpg

Matt