Scott Mock's 66 Chevelle Build.
 

I've had alot of PM's an Email's about my new build.It's a 1966 Chevelle that I found on Craig's-List.It was already painted the right Color (Silver).No chassis work had been done to it,Just a 383 400HP small Block.I pulled it and gave it to Brandon for his Javelin.I am dropping in a Mike Norris tuned Super charged/cylinder headed & cammed LS2 & T56.I cut off the stock chevelle frt. suspension and welded in a C-6 clip Fully boxed the chassis,ABC performance rear frame notch kit & mini tub's.Ride Tech triple ajustable coilover's,Ridetech rod end A-Body rear 4-link,Moser FullFloater 9" W/3:90 gear's &posi.Forgeline's 18 x 12's ZX3's w/titaninm center's/polished lip's PS2's 335/30/18's,ZO6 brake's,Vintage AC,3" Stainless Exhaust,Borla Muffler's,Rick's stainless Tank,Eddie Motorsports Frt Drive and Billet hood hinge's,American Atowire Harness,Stock OPG interior,Kirkey or Scat Seat's,1.75x.120 DOM Roll cage,Full custom auto sound Radio/XM/CD player,Trailer hitch w/2" stainless Ball.Diff,Rear end,oil,Power steering Cooler's http://i1104.photobucket.com/albums/...hevelle003.jpg

Wow you have been a busy boy!!:thumbsup:

So how far long is it?? :lol:

Sounds like a killer '66 Scott. You didn't miss a thing...:thumbsup:

very coool:thumbsup:

It's just about ready blow apart and start the powder coating & underside painting.http://i1104.photobucket.com/albums/...hevelle002.jpg

http://i1104.photobucket.com/albums/...hevelle006.jpghttp://i1104.photobucket.com/albums/...tanicII023.jpgFront tire's

Where did you get the iPhone looking dock you have in the dash?

Great project Scott. And killer parts list. :thumbsup:

It's a Custom auto sound face plate mount.

I need to get more photo's of the work from the last 2 week's and post it up.

Now that's what I'm talking about :thumbsup: Great fab work as usual Scott :hail: That's some tire on the front there :wow:

I still need to fab a firewall inset,trans tunnel,Ac install,Roll cage,Diff,rear,oil,PS,cooler & pump mounts,Trailer hitch,Rad overflow,PCV tank,Prep. all the under side for paint and bed liner,& powder coating,finish welding exhaust system.Then I can start putting back togather.

Excellent work Scott! :thumbsup:

This is by far the coolest car you have built can't wait to see it driving down the road this is going to a really nice car

What kind of supercharger?

Mike is going to hook me up with a 2900 Whipple.

:thumbsup: :thumbsup: Subscribed!

Waiting for more pics:yes:

Looks great. Keep the pics coming

Sick! 335s on the front? That's one way to prevent understeer. :thumbsup:

Nice trans cross-member! 1/2" stock?

1/2x2.5 cold roll bar.I still need to gusset the bends with alittle bracing.

The 335 on the front is sick! I guess I know now that my next project will have a 335 on the front and 345 on the back or I will not be able to sleep at night! Thanks a lot Scott, always put the pressure on.... HAHA

Who makes the AC vents you have in the dash??? They look cool...

Vintage Air make the AC vents.

The car looks good Scott. Can't wait to see it on the road.

out of the bag
 

Scott

:hail: 335s ! knew you would make it happen.:unibrow:

Tom

Thanks Roger!

Wow. Looks awesome already! Can't wait to see it complete.

Im another guy with front tire envy :D ! Everywhere you look there is something trick to see. :thumbsup: Fantastic build Scott!!!

Thank's Karl.It's a simple project, nuttin like BA Blu-Blaz.The reason for 335's up front is I just want it to turn in.:thumbsup:

Love it man! Looks killer!

Awesome build! 335 fronts, unreal.

Thank's I am just getting started so I have a little work to do.

Thank's, I have been working on a (335) sub frame for a 1st gen F-body for about a year now.It took a little work to make it work in A-Body.Getting the super narrowed frame rails,header's,steering shaft,rack placement,oil pan clearance to all work togather was really tough( My new CNC plasma table was a big help).But it turns lock to lock,go's thur the suspension travel pretty well.Some iner fender panel work is still needed.I won't be doing any long drive's with 335's up front.Will be using a 9.5-10" wheel for the Run to the Coast next year..Then when it's track time throw on the 335's.:thumbsup:

Wait, your coming to socal next year? I guess I will have to go and say hi. The car looks realy nice, can't wait to hear how it handles.

Thanks,
Jon

very wicked car!...subscribed!

Fricken Awesome!! :woot:

Great build Scott. :thumbsup:
I'm ready to see more on this Chevelle.

Looks great keep the pics coming.

Thank's,Will have some more photo's in a few day's.:thumbsup:

Jon,The goal is to finish the chevelle up and make the Drive to SoCal W/The Rack Pack gang,Albert Melchior,Brian Finch,Bill Howell, For the RTTC 2013.Mainly I want to get in on some of those free taco's Doug R & Cris G are dishin out.:thumbsup:

Thank's Matt.:thumbsup: